Metallic Materials - Hardness Test - Rockwell Superficial Test (Scales 15N, 30N, 45N, 15T, 30T and 45T)
Scope: This International Standard specifies a method for the Rockwell superficial hardness test (scales and field of application according to table 1) for metallic materials. Table 1 - Conditions for Rockwell superficial hardness test Hardness Hardness scale symbol 15N HR15N Diamond cone 29,42 30N HR30N Diamond cone 29,42 45N H R45N Diamond cone 29,42 15T HR15T Steel ball 1,587 5 mm 29,42 30T H R30T Steel bail 1,587 5 mm 29,42 45T H R45T Steel ball 1,587 5 mm 29,42 Type of indenter Preliminary Additional Total Field of application test force, test force, test force, (Rockwell superficial F. (N) F, N F (N) hardness range) 1 l7,7 264,8 411,9 1 l7,7 264,8 294,2 411,9 147,l 294,2 441,3 l47,l 441,3 70 to 94 HR15N 42 to 86 HR30N 20 to 77 HR45N 67 to 93 HR15T 29 to 82 HR30T 1 to 72 HR45T The field of application for each scale and test force is dependent on the hardness and thickness of the test piece or surface layer tested. Guidance for the choice of scale is given in annex A. IS0 1024 : 1989 E) Normative reference The following standard contains provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the edition indicated was valid. All standards are subject to revision, and parties to agreements based on this International Standard are encour- aged to investigate the possibility of applying the most recent edition of the standard given below. Members of IEC and IS0 maintain registers of currently valid International Standards. I SO 1079 : 1989, Metallic materials Hardness test - Verifi- cation of Rockwell superficial hardness testing machines (scales 75N, 3ON, 45N, 75T, 30T and 45TI. Symbols and their meanings 3.1 See tables 1 and 2 and figures 1 and 2. Table 2 - Symbols used Symbol FO Fl ho hl HR..N HR..T Meaning Angle of the diamond cone Radius of curvature at the tip of the diamond cone Diameter of steel ball Preliminary test force Additional test force Total test force Depth of indentation under preliminary test force before application of additional test force Increase in depth of indentation under additional test force Permanent increase in depth of indentation under preliminary test force