ISO 11077-2014 PDF

ISO 11077-2014 PDF

Aircraft ground equipment - De-icers - Functional requirements

$96.50 $193.00 -50%
Product Code: ISO 11077
Stock In Stock
Edition: 2ND
Published: 06/01/2014
Number of Pages: 28
File Size: 1 file, 539 Bytes

Available Options

Product Description

Aircraft ground equipment - De-icers - Functional requirements

Introduction: This International Standard specifies the functional and personnel safety requirements to be taken into account by manufacturers for the design of aircraft de-icing and anti-icing vehicles (de-icers). The requirements of this International Standard were determined based on generally recognized assumptions as to a) the normally intended use of aircraft ground support equipment on the ramp of international civil airports in order to handle, service, or maintain civil transport aircraft, or b) the environmental (surface, slope, weather, lighting, operating rules, staff qualification, etc.) conditions prevailing on the ramp area of the majority of international civil airports. In addition to customary environment conditions in this context, it is to be assumed that de-icers will be operated on snowy, icy, muddy, or slushed ramp surfaces and under freezing precipitation conditions. It is assumed that the manufacturers of de-icers define in the relevant documentation the specifically intended conditions of use and environment for their equipment, and the purchasers systematically review their own specific conditions of use and environment in order to determine whether those stated are adequate or negotiate with the manufacturer appropriate modifications to ensure they are. NOTE Negotiation between manufacturer and purchaser/user is considered essential to establish or verify the adequate conditions of use and design parameters. The requirements of this International Standard are ex

Scope: This International Standard specifies the general functional, performance, and safety requirements for a self-propelled vehicle equipped with a boom type aerial device and aircraft de-icing/anti-icing fluid (ADF) spraying systems, hereinafter designated as “de-icer”. This International Standard does not specify a comprehensive set of technical design criteria for aircraft de-icing/anti-icing vehicles, but only those relating to the main functional, safety, and performance requirements. This International Standard is not applicable to stationary equipment, e.g. gantries, cranes, used to perform de-icing/anti-icing operations on aircraft. Throughout this International Standard, the minimum essential criteria are identified by use of the key word “shall”. Recommended criteria are identified by use of the key word “should” and, while not mandatory, are considered to be of primary importance in providing safe, economical, and usable aircraft de-icers. Deviation from recommended criteria should only occur after careful consideration and thorough service evaluation have shown alternate methods to provide an equivalent level of safety.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 11077-2014 PDF

ISO 11077-2014 PDF

$96.50 $193.00