Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 12: Diagnostics services
Introduction: ISO 11783 specifies a communications system for agricultural equipment, based on the ISO 11898[4] protocol. SAE J1939[7] documents, on which parts of ISO 11783 are based, were developed jointly for use in truck and bus applications and for construction and agriculture applications. Joint documents were completed to allow electronic units that meet the truck and bus SAE J1939 specifications to be used by agricultural and forestry equipment with minimal changes. General information on ISO 11783 is to be found in ISO 11783-1. The purpose of ISO 11783 is to provide an open, interconnected system for on-board electronic systems. It is intended to enable electronic control units (ECUs) to communicate with each other, providing a standardized system. © ISO 2019 – All rights reserved
Scope: ISO 11783, as a whole, specifies a serial data network for control and communications on forestry or agricultural tractors and mounted, semi-mounted, towed, or self-propelled implements. Its purpose is to standardize the method and format of transfer of data between sensors, actuators, control elements and information storage, and display units, whether mounted on, or part of, the tractor or implement. This document describes the network’s diagnostic system. NOTE The name and contact information of the Maintenance Agency for this document can be found at http: //www.iso.org/mara.