Safety of machinery — General principles for design — Risk assessment and risk reduction
Introduction: The primary purpose of this International Standard is to provide designers with an overall framework and guidance for decisions during the development of machinery to enable them to design machines that are safe for their intended use. It also provides a strategy for standards developers and will assist in the preparation of consistent and appropriate type-B and type-C standards. The concept of safety of machinery considers the ability of a machine to perform its intended function(s) during its life cycle where risk has been adequately reduced. This International Standard is the basis for a set of standards which has the following structure: ⎯ type-A standards (basic safety standards) giving basic concepts, principles for design and general aspects that can be applied to machinery; ⎯ type-B standards (generic safety standards) dealing with one safety aspect or one type of safeguard that can be used across a wide range of machinery: ⎯ type-B1 standards on particular safety aspects (for example, safety distances, surface temperature, noise); ⎯ type-B2 standards on safeguards (for example, two-hand controls, interlocking devices, pressure- sensitive devices, guards); ⎯ type-C standards (machine safety standards) dealing with detailed safety requirements for a particular machine or group of machines. This International Standard is a type-A standard. When a type-C standard deviates from one or more technical provisions dealt with by this International Standard or by a type-B stand
Scope: This International Standard specifies basic terminology, principles and a methodology for achieving safety in the design of machinery. It specifies principles of risk assessment and risk reduction to help designers in achieving this objective. These principles are based on knowledge and experience of the design, use, incidents, accidents and risks associated with machinery. Procedures are described for identifying hazards and estimating and evaluating risks during relevant phases of the machine life cycle, and for the elimination of hazards or the provision of sufficient risk reduction. Guidance is given on the documentation and verification of the risk assessment and risk reduction process. This International Standard is also intended to be used as a basis for the preparation of type-B or type-C safety standards. It does not deal with risk and/or damage to domestic animals, property or the environment. NOTE 1 Annex B gives, in separate tables, examples of hazards, hazardous situations and hazardous events, in order to clarify these concepts and assist the designer in the process of hazard identification. NOTE 2 The practical use of a number of methods for each stage of risk assessment is described in ISO/TR 14121-2.
Contents:
- Foreword
- Introduction
- Scope
- 6.2.10 Pneumatic and hydraulic hazards
- 6.2.11 Applying inherently safe design measures to control systems
- 6.2.12 Minimizing probability of failure of safety functions
- 6.2.13 Limiting exposure to hazards through reliability of equipment
- 6.2.14 Limiting exposure to hazards through mechanization or automation of loading (feeding)/
- 6.2.15 Limiting exposure to hazards through location of setting and maintenance points outside