ISO 12217-3-2022 PDF

ISO 12217-3-2022 PDF

Small craft-Stability and buoyancy assessment and categorization-Part 3: Boats of hull length less than 6 m

$60.00 $120.00 -50%
Product Code: ISO 12217-3
Stock In Stock
Edition: 4.
Published: 12/2022
Number of Pages: 86
File Size: 1 file, 8 Bytes

Available Options

Product Description

Small Craft - Stability and Buoyancy Assessment and Categorization - Part 3: Boats of Hull Length Less Than 6 m

Introduction: This document enables the determination of the limiting environmental conditions to be determined for which an individual boat has been designed. It enables the boat to be assigned to a design category appropriate to its design and maximum load. The design categories used align with those in the Recreational Craft Directive of the European Union, EU Directive 2013/53/EU. Annex H provides worksheets to assist in the systematic assessment of a boat according to this document.  © ISO 2022 – All rights reserved

Scope: This document specifies methods for evaluating the stability and buoyancy of intact (i.e. undamaged) boats. The flotation characteristics of craft susceptible to swamping are also encompassed. The evaluation of stability and buoyancy properties using this document will enable the boat to be assigned to a design category (C or D) appropriate to its design and maximum load. This document is applicable to boats of hull length less than 6 m, whether propelled by human or mechanical power, except habitable sailing multihulls. Boats of hull length less than 6 m which are fitted with a full deck and quick-draining cockpit(s) complying with ISO 11812 can alternatively be assessed using ISO 12217-1 or ISO 12217-2 (for non-sailing and sailing boats, respectively), in which case higher design categories can be assigned. In relation to habitable multihulls, this document includes assessment of susceptibility to inversion, definition of viable means of escape and requirements for inverted flotation. This document excludes: — inflatable and rigid-inflatable boats covered by the ISO 6185 series, except for references made in the ISO 6185 series to specific clauses of the ISO 12217 series; — personal watercraft covered by ISO 13590 and other similar powered craft; — aquatic toys; — canoes and kayaks; — gondolas and pedalos; — sailing surfboards; — surfboards, including powered surfboards; — hydrofoils, foil stabilized boats and hovercraft when not operating in the displacement mode; and — submersibles. NOTE Displacement mode means that the boat is only supported by hydrostatic forces. It does not include or evaluate the effects on stability of towing, fishing, dredging or lifting operations, which need to be separately considered if appropriate. © ISO 2022 – All rights reserved ISO 12217-3:2022(E) 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 2896:2001, Rigid cellular plastics — Determination of wat

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 12217-3-2022 PDF

ISO 12217-3-2022 PDF

$60.00 $120.00