ISO 13078-2-2016 PDF

ISO 13078-2-2016 PDF

Dentistry - Dental furnace - Part 2: Test method for evaluation of furnace programme via firing glaze

$48.00 $96.00 -50%
Product Code: ISO 13078-2
Stock In Stock
Edition: 1ST
Published: 07/15/2016
Number of Pages: 16
File Size: 1 file, 415 Bytes

Available Options

Product Description

Dentistry - Dental furnace - Part 2: Test method for evaluation of furnace programme via firing glaze

Introduction: Dental furnaces are suitable for the manufacturing of metal-ceramic and partly also all-ceramic restorations for use in dentistry. Dental furnaces are particularly used for firing or sintering, respectively, of dental opaques, dentine and enamel materials to the respective compatible substructure materials. According to the current state of the art, the temperature of this process lies between 600 °C and 1 000 °C. The different calibration processes applied by the manufacturers of dental furnaces as well as the varying construction types of the dental furnaces currently on the market influence the firing result. Despite the fact that different dental furnaces can have identical digital external displays, different results regarding the degree of firing can be identified when processing the same ceramics under otherwise similar conditions. A different degree of firing not only causes differences that can be judged directly by the human eye (e.g. colour and transparency), but also deviations that cannot be detected by the eye. These are, for instance, the linear coefficient of thermal expansion, the bonding strength, the strength values and the acid solubility. Such changes may result in clinical failures (e.g. fractures) as well as changed aesthetics of the dental ceramic restoration. © ISO 2016 – All rights reserved

Scope: This document determines a degree of firing to be implemented by the user. It represents a test method for adapting the firing program of a dental furnace by determining the degree of firing of fired test specimens for a dental ceramic. The test method is suitable for powdered dental ceramics according to ISO 6872, Type I. The test method enables monitoring of the temperature control in the dental furnace by evaluating the firing degree of a dental ceramic. The test method is also suitable for evaluating the reproducibility of the firings in a dental furnace or for comparing several dental furnaces.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 13078-2-2016 PDF

ISO 13078-2-2016 PDF

$48.00 $96.00