ISO 13168-2023 PDF

ISO 13168-2023 PDF

Water quality-Simultaneous determination of tritium and carbon 14 activities-Test method using liquid scintillation counting

$96.50 $193.00 -50%
Product Code: ISO 13168
Stock In Stock
Edition: 2.
Published: 11/2023
Number of Pages: 26
File Size: 1 file, 1 Byte

Available Options

Product Description

Water quality — Simultaneous determination of tritium and carbon 14 activities — Test method using liquid scintillation counting

Introduction: Radionuclides are present throughout the environment; thus, water bodies (e.g. surface waters, ground waters, sea waters) contain radionuclides, which can be of either natural or anthropogenic origin: — naturally occurring radionuclides, including 3H, 14C, 40K and those originating from the thorium and uranium decay series, in particular 210Pb, 210Po, 222Rn, 226Ra, 228Ra, 227Ac, 232Th, 231Pa, 234U, and 238U can be found in water bodies due to either natural processes (e.g., desorption from the soil, runoff by rain water) or released from technological processes involving naturally occurring radioactive materials (e.g. mining, mineral processing, oil, gas and production, water treatment and the production and the use of phosphate fertilisers); — anthropogenic radionuclides such as 55Fe, 59Ni, 63Ni, 90Sr, 99Tc, transuranic elements (Np, Pu, Am, and Cm)and some gamma emitting radionuclides such as 60Co and 137Cs can also be found in natural waters. Small quantities of anthropogenic radionuclides can be discharged from nuclear facilities to the environment as a result of authorized routine releases. The radionuclides present in liquid effluents are usually controlled before being discharged to the environment[1] and water bodies. Anthropogenic radionuclides used in medical and industrial applications can be released to the environment after use. Anthropogenic radionuclides are also found in waters due to the contamination from fallout resulting above-ground nuclear detonations an

Scope: This document specifies a method for the simultaneous measurement of 3H and 14C in water samples by liquid scintillation counting of a source obtained by mixing the water sample with a hydrophilic scintillation cocktail. The method presented in this document is considered a screening method because of the potential presence of interfering radionuclides in the test sample. However, if the sample is known to be free of interfering radionuclides then 3H and 14C can be measured quantitatively. The method can be used for any type of environmental study or monitoring. This method is applicable to test samples of supply/drinking water, rainwater, surface and ground water, marine water, as well as cooling water, industrial water, domestic, and industrial wastewater having an activity concentration ranging from 5 Bq∙l-1 to 106 Bq∙l-1 (upper limit of the liquid scintillation counters for direct counting). For higher activity concentrations, the sample can be diluted to obtain a test sample within this range.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 13168-2023 PDF

ISO 13168-2023 PDF

$96.50 $193.00