ISO 13506-1-2024 PDF

ISO 13506-1-2024 PDF

Protective clothing against heat and flame-Part 1: Test method for complete garments-Measurement of transferred energy using an instrumented manikin

$60.00 $120.00 -50%
Product Code: ISO 13506-1
Stock In Stock
Edition: 2.
Published: 06/2024
Number of Pages: 52
File Size: 1 file, 3 Bytes

Available Options

Product Description

Vêtements de protection contre la chaleur et les flammes - Partie 1: Méthode d’essai pour vêtements complets - Mesurage de l’énergie transférée à l’aide d’un mannequin instrumenté

Introduction: The purpose of heat and flame-resistant protective clothing is to shield the wearer from hazards that can cause skin burn injury. The clothing is made from one or more materials. The evaluation of materials for potential use in this type of clothing generally involves two steps. First, the materials are tested to gauge their ability to limit flame spread. They are then tested to determine the rate of transferred energy through them when exposed to a particular hazard. A variety of bench scale test methods are used in these two steps. Bench scale test methods permit testing fabrics, seams, zippers, pockets, badges, buttons or other closures, metal and plastic clips or other features that can be included in a complete garment. Once suitable materials are identified, they are made into complete garments or ensembles. The overall design and performance of the garment can be assessed on a manikin-fire exposure system. This test method is not designed to measure material properties directly, but to evaluate the interaction of material behaviour and garment design. In this test method, a stationary, upright adult-sized manikin (male or female) is dressed in a complete garment and exposed to a laboratory simulation of a fire with controlled heat flux, duration and flame distribution. The average incident heat flux to the exterior of the garment is 84 kW/m2, a value similar to those used in ISO 9151, ISO 6942 and ISO 17492. The protection offered by the test specimens is evaluated thr

Scope: This document specifies the overall requirements, equipment and calculation methods to provide results that can be used for evaluating the performance of complete garments or protective clothing ensembles exposed to short duration flame engulfment. This test method establishes a rating system to characterize the thermal protection provided by single-layer and multi-layer garments made of flame resistant materials. The rating is based on the measurement of heat transfer to a full-size manikin exposed to convective and radiant energy in a laboratory simulation of a fire with controlled heat flux, duration and flame distribution. The heat transfer data is summed over a prescribed time to give the total transferred energy. Transferred energy and thermal manikin protection factor (TMPF) assessment methods provide a means to quantify product performance. The exposure heat flux is limited to a nominal level of 84 kW/m2 and durations of 3 s to 20 s dependant on the risk assessment and expectations from the thermal insulating capability of the garment. The results obtained apply only to the particular garments or ensembles, as tested, and for the specified conditions of each test, particularly with respect to the heat flux, duration and flame distribution. This test method covers visual evaluation, observation, inspection and documentation on the overall behaviour of the test specimen(s) before, during and after the exposure. The effects of body position and movement are not addressed in this test method. The heat flux measurements can also be used to calculate the predicted skin burn injury resulting from the exposure (see ISO 13506-2). This test method does not simulate high radiant exposures such as those found in arc flash exposures, some types of fire exposures where liquid or solid fuels are involved, nor exposure to nuclear explosions. NOTE This test method is complex and requires a high degree of technical expertise in both the test setup and operation. Even minor deviations from the instructions in this test method can lead to significantly different test results.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 13506-1-2024 PDF

ISO 13506-1-2024 PDF

$60.00 $120.00