ISO 14085-6-2015 PDF

ISO 14085-6-2015 PDF

Aerospace series - Hydraulic filter elements - Test methods - Part 6: Initial cleanliness level

$48.00 $96.00 -50%
Product Code: ISO 14085-6
Stock In Stock
Edition: 1ST
Published: 03/01/2015
Number of Pages: 14
File Size: 1 file, 234 Bytes

Available Options

Product Description

Aerospace series - Hydraulic filter elements - Test methods - Part 6: Initial cleanliness level

Introduction: In aerospace hydraulic fluid power systems, power is transmitted and controlled through a liquid under pressure. The liquid is both a lubricant and power-transmitting medium. The presence of solid contaminant particles in the liquid interferes with the ability of the hydraulic fluid to lubricate and causes wear and malfunction of the components. The extent of contamination in the fluid has a direct bearing in the performance, reliability, and safety of the system, and needs to be controlled to levels that are considered appropriate for the system concerned. Filters are used to control the contamination level of the fluid by removing solid contaminant particles, typically consisting of a filter element enclosed in a filter housing. The filter element is the porous device that performs the actual process of filtration. The complete assembly is designated as a filter. Hydraulic fluid circuits require high levels of cleanliness which are not to be degraded by the filter element itself when installed into the circuit. This procedure defined a test method to determine the initial cleanliness level of a new hydraulic filter element. © ISO 2015 – All rights reserved

Scope: This part of ISO 14085 defines a reference method for determining the level of cleanliness of new filter elements for use in aircraft hydraulic systems, after production prior to shipment, or prior to installation in the circuit. It applies to filter elements used on systems requiring fluid cleanliness conditions defined in the particular specification. The tests data resulting from application of this part of ISO 14085 can be used to compare the cleanliness of aerospace hydraulic filter elements.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 14085-6-2015 PDF

ISO 14085-6-2015 PDF

$48.00 $96.00