Protective clothing - Protection against flame - Limited flame spread materials, material assemblies and clothing
Introduction: The purpose of this International Standard is to provide minimum performance requirements for clothing in order to reduce the possibility of the clothing and/or its materials burning when in occasional and brief contact with small flames and thereby, itself constituting a hazard. For complete protection against exposure to flame, it will be necessary to protect the head, face, hands, and/or feet with suitable PPE and, in some cases, appropriate respiratory protection might also be considered necessary. Attention is drawn to ISO/TR 2801:2007,[5] which sets out guidelines for selection, use, care, and maintenance of protective clothing against flame. Nothing in this International Standard is intended to restrict any jurisdiction, purchaser, or manufacturer from exceeding these minimum requirements. vi © ISO 2015 – All rights reserved
Scope: This International Standard specifies the performance requirements for the limited flame spread properties of all materials, all material assemblies, and protective clothing in order to reduce the possibility of the clothing burning when in occasional and brief contact with small flames and thereby constituting a hazard. Additional requirements for clothing are also specified, including design requirements, mechanical requirements, marking, and information supplied by the manufacturer. When protection against heat hazards is necessary, in addition to protection against flame, this International Standard is not appropriate. International Standards such as ISO 11612 are to be used instead. A classification system is given for materials, material assemblies, and garments which are tested according to ISO 15025, Procedure A.