Systèmes spatiaux - Composants électriques, électroniques et électromécaniques (EEE) - Partie 1: Gestion des composants
Introduction: ISO 14621-1 and ISO 14621-2 are designed to jointly assist the user and supplier communities in developing and executing an effective process for the design, selection and application of electrical, electronic, and electromechanical (EEE) space parts throughout the life cycle of the programme. NOTE In both ISO 14621-1 and ISO 14621-2, the family of EEE parts includes electro-optical parts. The strategy represented in the ISO 14621 series is: — for ISO 14621-1 a system approach to managing risk throughout the life cycle of the programme, by developing, selecting and properly applying the right EEE part for its intended application; — for ISO 14621-2 a framework for developing and documenting an EEE parts control programme to assure that the parts used in space flight hardware have acceptable risk, i.e. possess adequate functional, radiation and reliability characteristics to meet the system requirements. Both ISO 14621-1 and ISO 14621-2 should be tailored to meet the specific needs of each individual programme, i.e. to address the applicable system performance requirements, risk tolerance, budget, mission duration, operating environment, and schedule. Tailoring should result in a set of planned activities that are not only capable of achieving all contractual EEE parts related requirements, but also commensurate with the space system’s unit-value/mission-criticality and life cycle technical data product requirements. NOTE This type of planning is sometimes referred to as capab
Scope: This document addresses the key elements for an EEE parts management programme for space systems and is written in general terms as a baseline for developing, implementing, validating, and evaluating a space parts management programme. The family of EEE parts includes electro-optical parts.