Fire tests - Calibration and use of heat flux meters - Part 4: Guidance on the use of heat flux meters in fire tests
Introduction: In many fire test methods, the radiation level is specified and, therefore, it is of great importance that the radiative heat flux is well defined and measured with sufficient accuracy. Radiative heat transfer is also the dominant mode of heat transfer in most real fires. In practice, radiative heat flux is usually measured with so-called total heat flux meters of the Schmidt- Boelter (thermopile) or Gardon (foil) type. Such meters register the combined heat flux by radiation and convection to a cooled surface. The contribution to the heat transfer by convection depends mainly on the temperature difference between the surrounding gases and the sensing surface and on the velocity of the surrounding gases. It will, however, also depend on the size and shape of the heat flux meter, its orientation, and its temperature level, which is near the cooling water temperature. In many practical situations in fire testing, the contribution due to convection to the sensing surface of the instrument can amount to 25 % of the heat flux. Therefore, it is always necessary to determine and control this part. To determine the fraction of total heat flux due to radiation, a calibration scheme has been developed where primary calibration is performed on two different types of heat flux meters: (1) a total hemispherical radiometer sensitive to radiation only, and (2) a total heat flux meter (most frequently used) sensitive to both radiant heat transfer and convective heat transfer. When using heat
Scope: This part of ISO 14934 provides guidance on the use of heat flux meters in fire testing applications, including the description and working principles of common heat flux meters and methods for their selection and maintenance. The guidance can also be applied to measuring heat flux from radiant panels and other large heat sources used to simulate the heat flux from a fire. It is applicable for all common testing purposes when measuring heat flux from radiant sources. This part of ISO 14934 also provides basic theory and working principles of heat flux meters and methods for selection, use, and maintenance of heat flux meters. Although it is particularly aimed at the application of heat flux meters in fire tests and experimental works of fire research, it can also serve as a guide for other research applications like research of boilers, combustion processes, etc. Instruments, which measure the transient temperature of a solid body of known mass and heat capacity to infer the heat flux (slug calorimeter type), are not covered by this part of ISO 14934.
Contents:
- Foreword
- Introduction
- Scope