Machine tools - Environmental evaluation of machine tools - Part 2: Methods for measuring energy supplied to machine tools and machine tool components
Introduction: As environmental impact is a common challenge for all products and as natural resources become scarce, environmental performance criteria for machine tools need to be defined and the use of these criteria needs to be specified. Machine tools are complex systems used by industry to manufacture “ready for use” products or semi-finished workpieces. Their environmental impact includes wasted raw material, use of auxiliary substances such as lubricants and other material flows, as well as conversion of electrical energy into heat, dissipation of heat to the ambient or heat exchange by fluids and possibly the use of other resources such as compressed air. Based on relevance considerations, the ISO 14955 series is focussed on environmental impacts related to the energy supplied to the machine tool during the use stage. The performance of a machine tool as key data for investment is multi-dimensional regarding its economic value, its technical specification and its operating requirements which are influenced by the specific application. The energy supplied to the same machine tool can vary depending on the part which is being manufactured and the conditions under which the machine tool is operated. Therefore, the environmental evaluation of a machine tool cannot be done regardless of these aspects. ISO 14955-1 describes a methodology for the environmental evaluation of machine tools and gives reasons for measuring energy supplied to the machine tool. ISO 14955-3 to ISO 14955-5 descri
Scope: This document describes how measurements are made by providing measuring methods in order to produce reproducible data about the energy supplied to a machine tool under specified conditions. Furthermore, it provides methods to quantify the energy supplied to components in order to assign their share to generalized machine tool functions as described in ISO 14955-1. It supports the energy-saving design methodology according to ISO 14955-1 by providing measuring methods for the energy supplied to machine tools. The assignment of the energy supplied to machine tool functions requires measurements at machine tool component level. These measurements need to be reproducible and independent of conditions other than those being recorded and documented. The results of the measurements are intended to document improvements to the design, specifically under energy aspects, and/or to allow evaluating the energy involved in the manufacturing of a given part by a given machine tool. Any comparison requires identical conditions and ensures by specification and measurement that similar results are achieved.