ISO 15114-2014 PDF

ISO 15114-2014 PDF

Fibre-reinforced plastic composites - Determination of the mode II fracture resistance for unidirectionally reinforced materials using the calibrated end-loaded split (C-ELS) test and an effective crack length approach

$71.50 $143.00 -50%
Product Code: ISO 15114
Stock In Stock
Edition: 1ST
Published: 05/15/2014
Number of Pages: 26
File Size: 1 file, 789 Bytes

Available Options

Product Description

Fibre-reinforced plastic composites - Determination of the mode II fracture resistance for unidirectionally reinforced materials using the calibrated end-loaded split (C-ELS) test and an effective crack length approach

Introduction: Previous attempts to determine mode II delamination resistance curves (R-curves) for composites have been hampered by the experimental difficulty of determining crack length in the absence of any applied beam opening displacement and when a complex damage zone develops ahead of the crack front. The effects of friction in the different mode II test specimens have also been widely debated and have typically been determined to introduce errors of between 1 % and 3 % in GIIC determination for ELS specimens (n.b. friction effects would appear to be more significant in 3 point loaded end notch flexure (3ENF) (to be standardized by ASTM) and, particularly, in the 4 point loaded (4ENF) test specimen. Stabilized ENF was not popular in round-robin trials). The procedure presented here uses the end-loaded split test apparatus and specifies an experimental procedure to calibrate the clamping fixture and simultaneously determine the flexural modulus of the specimen. This serves two purposes. Firstly, the clamp calibration has been found to significantly reduce scatter in the results between different test laboratories and secondly, it provides an accurate means by which crack lengths can be calculated and thus their measurement can be avoided. Although this procedure still includes an experimental determination of crack length, the use of calculated (or effective crack lengths) means that values of GIIC can be determined without experimentally measured crack length values. The procedure i

Scope: This International Standard specifies a method for the determination of mode II shear load delamination resistance. GIIC, (critical energy release rate), of unidirectional fibre-reinforced plastic composites using the calibrated end-loaded split (C-ELS) test. It is applicable to carbon-fibre and glass-fibre reinforced thermosets and thermoplastics. The scope is not necessarily limited to these fibres and lay-ups, but for laminates with other types of fibres or lay-ups, no recommendations for specimen dimensions and fibre volume content are currently available.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 15114-2014 PDF

ISO 15114-2014 PDF

$71.50 $143.00