ISO 15607-2019 PDF

ISO 15607-2019 PDF

Specification and qualification of welding procedures for metallic materials-General rules

$48.00 $96.00 -50%
Product Code: ISO 15607
Stock In Stock
Edition: 2ND
Published: 10/2019
Number of Pages: 18
File Size: 1 file, 1 Byte

Available Options

Product Description

Specification and qualification of welding procedures for metallic materials — General rules

Introduction: Welding procedure specifications (WPSs) are needed in order to provide a well-defined basis for planning of the welding operations and for quality control during welding. Welding is considered a special process in the terminology of standards for quality systems. Standards for quality systems usually require that special processes be carried out in accordance with written procedure specifications. Preparation of a welding procedure specification provides the necessary basis for, but does not in itself ensure that the welds fulfil the requirements. Some deviations, notably imperfections and distortions, can be evaluated by non-destructive methods on the finished product. However, metallurgical deviations constitute a special problem because non-destructive evaluation of the mechanical properties is impossible at the present level of non-destructive technology. This has resulted in the establishment of a set of rules for qualification of the welding procedure prior to the release of the specification to actual production. This document defines these rules. Qualification of a preliminary welding procedure specification (pWPS) by more than one method is not recommended. © ISO 2019 – All rights reserved

Scope: This document is part of a series of standards dealing with specification and qualification of welding procedures. Annex A gives details of this series of standards, Annex B gives a table for the use of these standards, and Annex C gives a flow diagram for the development and qualification of a WPS. This document defines general rules for the specification and qualification of welding procedures for metallic materials. This document also refers to several other standards as regards detailed rules for specific applications. This document is applicable to manual, partly mechanized, fully mechanized and automated welding. Welding procedures are qualified by conforming to one or more welding procedure qualification records (WPQR). The use of a particular method of qualification is often a requirement of an application standard. It is assumed that welding procedure specifications are used in production by competent welders, qualified in accordance with the relevant part of ISO 9606 or by competent operators qualified in accordance with ISO 14732.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 15607-2019 PDF

ISO 15607-2019 PDF

$48.00 $96.00