Compacted (vermicular) graphite cast irons Classification
Introduction: This document deals with the classification of compacted (vermicular) graphite cast irons (CGI) in accordance with the mechanical properties of the material. The properties of compacted (vermicular) graphite cast irons depend on their graphite and matrix microstructure. The mechanical properties of the material can be evaluated on machined test pieces prepared from — separately cast samples, — samples cast in the mould alongside the casting, with a joint running system, hereafter called side- by-side samples, or — samples cast onto either the casting or the running system, hereafter referred to as cast-on samples, or — samples cut from a casting (only when an agreement is made between the manufacturer and the purchaser). The material grade is defined by mechanical properties measured on machined test pieces prepared from separately cast samples, cast-on samples, or samples cut from the casting by agreement between the manufacturer and the purchaser. Annex A provides typical properties for compacted (vermicular) graphite cast irons obtained in separately cast test bars. Annex B provides information on a procedure to determine the graphite nodularity of the microstructure. Annex C provides information on properties and examples for typical applications of compacted (vermicular) graphite cast irons. Annex D provides cross-references of ISO 16112 grade designations to other national and international standard grades of compacted (vermicular) graphite cast iron. References used in
Scope: This document specifies five grades of compacted (vermicular) graphite cast irons. This document specifies five grades based on the minimum mechanical properties measured on machined test pieces prepared from — separately cast samples, — side-by-side cast samples, — cast-on samples, or — samples cut from a casting.