Petroleum products - Fuels (class F) - Specifications of dimethyl ether (DME)
Introduction: According to its physical properties, dimethyl ether (DME) can be used as fuel. It is comparable to liquefied petroleum gas (LPG) so it can be used as heating fuel, either mixed with LPG or in its pure form. DME also has very good auto-ignition qualities which makes it a replacement fuel for diesel. The energy efficiency chain is a key issue for choosing DME, which has a better life cycle CO2 balance than most of the other alternative fuels. DME is a commodity which can be made from various raw materials, including natural gas, coal, black liquor, biomass, and wastes. As some national standards have been already issued, it seems important to create an international DME specification standard in order to unify the requirements at an international commercial level and to ease the international development of DME as fuels. This International Standard focuses on DME as heating fuel for industrial boilers and for households for cooking and heating, and as alternative to diesel for vehicles. © ISO 2015 – All rights reserved
Scope: This International Standard specifies the characteristics of DME used as fuel of which the main component is the dimethyl ether synthesized from any organic raw materials. This International Standard is applicable for DME used as heating fuel, industrial fuel, and to replace diesel fuel or gas oil. It does not deal with the possible additives necessary for specific end-use applications, for example, odorant typically added to heating fuel and lubricity improvers for DME used as replacement of diesel. Such additives are typically specified for the different end-use applications, at an appropriate level — national, regional, or international.