ISO 19472-2-2022 PDF

ISO 19472-2-2022 PDF

Machinery for forestry-Winches-Part 2: Traction aid winches

$129.00 $258.00 -50%
Product Code: ISO 19472-2
Stock In Stock
Edition: 1ST
Published: 01/2022
Number of Pages: 50
File Size: 1 file, 4 Bytes

Available Options

Product Description

Machinery for forestry — Winches — Part 2: Traction aid winches

Introduction: This document is a type-C standard as stated in ISO 12100:2010. This document is of relevance, in particular for the following stakeholder groups representing the market players with regard to machinery safety: — machine manufacturers (small, medium and large enterprises); — health and safety bodies (regulators, accident prevention organisations, market surveillance etc.). Others can be affected by the level of machinery safety achieved with the means of the document by the above-mentioned stakeholder groups: — machine users/employers (small, medium and large enterprises); — machine users/employees (e.g. trade unions, organizations for people with special needs); — service providers, e.g. for maintenance (small, medium and large enterprises). The above-mentioned stakeholder groups have been given the possibility to participate at the drafting process of this document. The machinery concerned and the extent to which hazards, hazardous situations or hazardous events are covered are indicated in the Scope of this document. When requirements of this type-C standard are different from those which are stated in type-A or type-B standards, the requirements of this type-C standard take precedence over the requirements of the other standards for machines that have been designed and built according to the requirements of this type-C standard. Traction aid winches are used with forest machines when operating in sloped terrain and on soils with limited bearing capacity or poor traction.

Scope: This document defines the dimensions and specifies the performance and safety requirements for traction aid winches used in forestry for assisting supported machines while going uphill and downhill (pulling and braking). This document is applicable to fixed and detachable winches and their components, connections and communications, which are used with mobile and self-propelled forestry machinery as defined in ISO 6814:2009 and earth moving machinery as defined in ISO 6165:2012. It is also applicable to remote traction aid winch systems which are installed on a position away from the supported machine. In addition, this document defines requirements for the assembly of supported machine and traction aid winch. It is not applicable to winches which are not using a controlled rope force while going downhill and winches used for skidding, hoisting operations on cranes, draglines, high lead logging, rope logging systems or yarding. The kind of prime mover used to drive a traction aid winch does not limit the applicability of this document. This document is intended to be applied to traction aid systems used on machines where, without use of these systems, the machine remains stationary on slopes under its independent control (see Annex E). Forestry machines, as defined in ISO 6814:2009, that are used as anchor or supported machines are not in the scope of this document. Requirements for the safety of many types of supported machines are within the scope of ISO 11850:2011. This document is not applicable to traction aid winches manufactured before the date of its publication.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 19472-2-2022 PDF

ISO 19472-2-2022 PDF

$129.00 $258.00