ISO/CIE 23603-2024 PDF

ISO/CIE 23603-2024 PDF

Standard method of assessing the spectral quality of daylight simulators for visual appraisal and measurement of colour

$96.50 $193.00 -50%
Product Code: ISO/CIE 23603
Stock In Stock
Edition: 1.
Published: 10/2024
Number of Pages: 26
File Size: 1 file, 2 Bytes

Available Options

Product Description

Standard method of assessing the spectral quality of daylight simulators for visual appraisal and measurement of colour

Introduction: The purpose of the assessment method described in this document is to quantify the suitability of the spectral irradiance distribution of a practical daylight simulator of CIE daylight illuminant D55, D75 or CIE standard daylight illuminants D50 and D65 for the visual appraisal and measurement of colours of fluorescent or non-fluorescent specimens. The basis for the assessment is the special metamerism index for change in illuminant, using pairs of virtual (rather than real) specimens specified by their reflecting and fluorescing properties. The pairs of specimens are metameric matches under the CIE daylight illuminant, when evaluated with the CIE 1964 standard colorimetric observer. The method described in this document quantifies the mismatch when the pairs of virtual specimens are illuminated by the daylight simulator under test and evaluated by the same standard colorimetric observer. A visible range metamerism index is derived to quantify the suitability of the simulator for the visible wavelength range. An ultraviolet range metamerism index is derived using a different set of virtual metameric pairs, each pair having a fluorescent and a non-fluorescent specimen which spectrally match for the CIE daylight illuminant and CIE standard colorimetric observer. The non-fluorescent specimen in each pair is specified by its spectral radiance factor. The fluorescent specimen in each pair is specified by its spectral reflected radiance factor, relative spectral distribution of rad

Scope: This document specifies a method of assessing the spectral quality of the irradiance provided by a daylight simulator to be used for visual appraisal of colours or for colour measurements and a method of assigning a quality grade to the simulator. It specifies the maximum permissible deviation of the chromaticity of the simulator from the chromaticity of the CIE standard daylight illuminant or CIE daylight illuminant being simulated for a daylight simulator to be graded by this method.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO/CIE 23603-2024 PDF

ISO/CIE 23603-2024 PDF

$96.50 $193.00