ISO/IEC 15961-4-2016 PDF

ISO/IEC 15961-4-2016 PDF

Information technology - Radio frequency identification (RFID) for item management: Data protocol - Part 4: Application interface commands for battery assist and sensor functionality

$96.50 $193.00 -50%
Product Code: ISO/IEC 15961-4
Stock In Stock
Edition: 1ST
Published: 08/01/2016
Number of Pages: 32
File Size: 1 file, 976 Bytes

Available Options

Product Description

Information technology - Radio frequency identification (RFID) for item management: Data protocol - Part 4: Application interface commands for battery assist and sensor functionality

Introduction: The technology of radio frequency identification (RFID) is based on non-contact electronic communication across an air interface. The structure of the bits stored in the memory of the RFID tag is invisible and accessible between the RFID tag and the interrogator only by the use of the appropriate air interface protocol, as specified in the corresponding part of ISO/IEC 18000. Since the initial publication of ISO/IEC 18000, it has become possible to add sensors to the RFID tag using various physical methods, but always using the air interface protocol as a consistent means of communicating between the RFID tag and the interrogator. For sensor information, functional commands from the application and responses from the interrogator are processed in a standard way. This allows equipment to be interoperable. In special cases, when the sensor is attached to or integrated within an RFID tag, this enables configuration parameters to be encoded in one system’s implementation with the resultant sensory information to be read at a later time in a completely different and unknown system’s implementation. The data bits stored on each RFID tag and sensor shall be formatted in such a way as to be reliably read at the point of use if the sensor is to fulfil its basic objective. The integrity of this is achieved through the use of an application protocol, for example, as supported by the functional commands specified in this document and as specified in ISO/IEC 24791. Manufacturers of radio

Scope: This document provides a set of application commands and their associated responses for the following functions: — to start and stop battery assistance; — to select and de-select a particular sensory function supported by the RFID tag; — to set sensor parameters both initially and ongoing; — to start and stop the sensor monitoring the environment; — to access sensor data; — to establish the battery status. ISO/IEC 24753 defines the encoding rules for identifying sensors, their functions, their delivered measurements, and the processing rules for sensor data. As such, it receives commands as defined in this document and provides the information that is required for the appropriate responses.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO/IEC 15961-4-2016 PDF

ISO/IEC 15961-4-2016 PDF

$96.50 $193.00