Safety of toys — Part 9: Safety aspects related to mechanical and physical properties — Comparison of ISO 8124-1, EN 71-1 and ASTM F963
Introduction: The purpose of this document is to compare and contrast the identified versions of ASTM F963-23, EN 71- 1:2014+A1:2018 and ISO 8124-1:2022. This document focuses on the contents of ASTM F963-23, EN 71- 1:2014+A1:2018 and ISO 8124-1:2022 as they relate to mechanical and physical properties including scope, definitions, general requirements, warnings and test methods. For ease of use and readability, ISO 8124-1:2022, Clause 4 is listed in Clause 6. For example, ISO 8124-1:2022, 4.3 relates to 6.4. This document is an overview and, therefore, does not cover the entirety of all the differences among ISO 8124-1, ASTM F963-23 and EN 71-1. In addition, this document is not intended to be relied on to fully understand conformity with ASTM F963-23, EN 71-1:2014+A1:2018 and ISO 8124-1:2022 or the requirements within them. In the case of any discrepancies in the comparisons presented, refer to the relevant clauses of the referenced standards. The index of requirements in EN 71-1 is given in Annex A. The index of requirements in ASTM F963-23 is given in Annex B. © ISO 2025 – All rights reserved
Scope: This document consists of a comparison of the mechanical and physical requirements covered by the following toy safety standards: a) ISO: ISO 8124-1:2022; b) Europe (CEN): EN 71-1:2014+A1:2018; c) USA: ASTM F963-23.