ISO TS 19590-2024 PDF

ISO TS 19590-2024 PDF

Nanotechnologies-Characterization of nano-objects using single particle inductively coupled plasma mass spectrometry

$60.00 $120.00 -50%
Product Code: ISO TS 19590
Stock In Stock
Edition: 2.
Published: 08/2024
Number of Pages: 36
File Size: 1 file, 2 Bytes

Available Options

Product Description

Nanotechnologies - Distribution granulométrique et concentration de nanoparticules inorganiques en milieu aqueux par spectrométrie de masse à plasma induit en mode particule unique

Introduction: Following the introduction of single particle inductively coupled plasma mass spectrometry (spICP-MS) by Degueldre in 2003,[1] the technique has increasingly been used for nano-object characterization due to its high sensitivity, elemental specificity, the fact that often minimal sample preparation is needed and the development of much improved instrumentation, along with user-friendly data analysis software. In spICP-MS, a very diluted suspension containing nano-objects is introduced continuously into an ICP-MS system with the intent that the ion cloud from one particle at a time arrives at the detector, set to acquire data with a high time resolution (i.e. dwell time). Following the nebulization, a fraction of the nano-objects enter the plasma where they are atomized, and the individual atoms ionized. Every atomized particle results in a cloud of ions which is then sampled by the mass spectrometer. The mass spectrometer can be tuned to measure any specific element. Typically, only one mass-to-charge value per single particle will be monitored with a quadrupole-based MS instrumentation. However, the technique can also be used with time-of-flight (TOF) mass spectrometers, allowing simultaneous multi-element and multi-isotope detection. The number of events detected in each run (time scan) is directly proportional to the number of nano-objects in the suspension introduced but necessitates calibration of the sample transport efficiency to calculate the particle number concentra

Scope: This document specifies parameters, conditions and considerations for the reliable detection, characterization and quantification of nano-objects in aqueous suspension by spICP-MS. Particle number concentration, particle mass, particle mass concentration, particle spherical equivalent diameter, and number-based size distribution are considered the main measurands, but the technique also allows for determination of the dissolved element mass fraction in the sample. This document provides general guidelines and procedures related to spICP-MS application, and specifies minimal reporting requirements.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO TS 19590-2024 PDF

ISO TS 19590-2024 PDF

$60.00 $120.00