Water quality — Active biomonitoring method with in situ caged benthic amphipods
Introduction: Some chemical substances (metals or hydrophobic organic contaminants) accumulate in organisms. The measurement of bioaccumulation using living organisms is found to be a valid approach for monitoring chemical contamination. Two biomonitoring strategies can be applied to measure chemical substances in the biota: either passive approaches based on sampling or collecting indigenous organisms at the monitoring station,[11] or active approaches based on transplanting, by caging, organisms from a reference source population.[4],[7] Active biomonitoring makes it possible to: — overcome the lack of indigenous organisms at certain monitoring stations; — minimize the biological variability of the responses measured, associated with the impact of confounding factors such as the exposure history and time, reproductive status, physiological state, age, or sex of the organisms sampled. This enables a reliable comparison of results between stations and between sampling dates.[6] This method limits the risk of organisms escaping during caging: — enclosure chambers present holes with diameter inferior to organisms' size and are securely closed with screwed cap; — enclosure chambers are fixed and protected from breakage by being installed inside an exposure system.1) This document describes a method to expose test organisms (amphipods), directly on the field by a caging methodology, with the aim to measure bioaccumulation of chemical substances on a monitoring station, i.e. either the concentr
Scope: This document describes a method to expose test organisms (amphipods), directly on the field by a caging methodology, with the aim to measure bioaccumulation of chemical substances on a monitoring station, i.e. either the concentrations of metals or organic compounds, or both, accumulated in the organisms. This document also describes the specifications for test organism selection and conditioning, in situ exposure, and finally sorting and conditioning of the surviving organisms after exposure. This document does not apply to organism preparation methods (freeze-drying, extraction, mineralization) and quantification of the chemical substances.