Surface chemical analysis — Secondary ion mass spectrometry — Method for the measurement of mass resolution in SIMS
Introduction: Mass resolution is one of the most important instrumental parameters in mass spectrometry (MS). For any MS experiments, an unambiguous result can only be acquired if sufficient mass resolution is reached to separate the target analytes from any possible interference. If the mass resolution of the instrument is insufficient, it can result in a false positive or negative signal. Therefore, the mass resolution is the primary consideration for determining whether an instrument is adequate for the intended purpose. For routine applications, the mass resolution should be adjusted based on the analytical requirements of the sample. Mass resolution is important not only for the instrument acceptance tests and fundamental studies, but also for almost all routine applications. This document gives guidance for the measurement of mass resolution in SIMS. Various definitions of mass resolution have been summarized and common problems with popular definitions have been discussed elsewhere[18]. To compare mass resolution between different instrument or/and different types of instruments (e.g. TOF-SIMS, Magnetic SIMS, Quadrupole SIMS, Fourier Transform SIMS and Orbitrap-SIMS, etc.), it is necessary to show the measured peak shape and define mass resolution correctly. After introducing a reasonable new definition for mass resolution and a method considering the peak shape to compare the mass resolution between TOF-SIMS, Magnetic SIMS, Quadrupole SIMS and Fourier Transform SIMS, this document
Scope: This document specifies a method for measuring the mass resolution in SIMS, and how to compare the mass resolution between different instruments (e.g. TOF-SIMS, Magnetic SIMS, Quadrupole SIMS, Fourier Transform SIMS, etc.) by considering the peak shapes.