Fasteners — Coating system assessment — Complementary and additional aspects to CQI-11
Introduction: Plating system assessment (CQI-11) 3rd edition was developed by AIAG (Automotive Industry Action Group) with the intent to help better evaluation of the quality systems in place at plating shops supplying OEM automotive coatings such as zinc and zinc alloy electrodeposits, decorative plating applied to metal or plastic substrates, and hard chromium deposits, as well as electroless nickel and electropolishing processes. The objective of the 3rd edition of CQI-11 was to update as needed, improve document clarity, and include the ISO 9001 and IATF 16949:2016 Quality Management System concepts of “Process Approach” and “Risk Management”. The Automotive Industry Action Group (AIAG) was founded in 1982 by representatives of the three largest North American automotive manufacturers: Ford, General Motors and Chrysler. It was originally created to develop recommendations and a framework for the improvement of quality in the North-American automotive industry. Among others, the AIAG publishes automotive industry standards, including Production Part Approval Process (PPAP) quality specifications. These documents have become a de facto quality standard in North America that have to be complied with by all Tier 1 suppliers. Increasingly, these suppliers are now requiring complete compliance from their suppliers, so that many Tier 2 and 3 automotive suppliers now shall also comply. CQI-11 is intended to be a self-Assessment auditing tool for electroplating processes, and its 3rd edition wa
Scope: This document deals with electroplating process evaluation for fasteners, including fastener expected coating properties. This document is a complement to CQI-11 in order to deal with fastener specific aspects not fully covered by CQI-11, and to clarify some questions/items when they are not fully suitable for fasteners. This document is applicable to all parties involved in the supply chain for coated fasteners, i.e. fastener manufacturers, chemical suppliers, electroplaters and purchasers. The requirements for electroplating fasteners specified in this document are essentially based on ISO 4042, ISO/TR 20491 and ISO 16047. NOTE Requirements for electroplating fasteners are also given in ASTM F1941/F1941M.