ISO TR 4553-2022 PDF

ISO TR 4553-2022 PDF

Deformations and displacements of buildings and building elements at serviceability limit states

$71.50 $143.00 -50%
Product Code: ISO TR 4553
Stock In Stock
Edition: 1ST
Published: 01/2022
Number of Pages: 20
File Size: 1 file, 1 Byte

Available Options

Product Description

Deformations and displacements of buildings and building elements at serviceability limit states

Introduction: The underlying aim of this document is to provide guidance for the structural designer to identify those aspects of deformation that affect the suitability of a building for the purposes for which it was intended, and to suggest certain criteria by which the serviceability of the building in this respect can be assessed. In addition, numerical values for these criteria are provided to give some guidance where this might be appropriate. Deformations of building structures can affect the serviceability of the building by causing damage to parts of the building and its finishes, by disturbing or harming users, or by preventing proper use of the building. Deformations can be caused by ground movements, by differential settlement of foundations, by environmental and occupational loads, by pre-stressing forces, and by movements of building materials due to creep under load, or changes in temperature, moisture content or chemical composition. Prior to the 1960s, the allowable design stresses assigned to most engineering materials were low and design methods were conservative. This resulted in highly redundant building forms, typically with comparatively short spans and relatively massive elements. Such buildings were generally very stiff to the extent that deflection problems were uncommon. There was little need to realistically ascertain the actual deformation of elements since these seldom controlled design or element sizes. In contrast, modern design methods result in structures

Scope: This document establishes the basic principles for the determination of deformations of buildings at the serviceability limit state when formulating national standards and recommendations. This document contains information on how serviceability for buildings and building elements is dealt with in some national standards.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO TR 4553-2022 PDF

ISO TR 4553-2022 PDF

$71.50 $143.00