ISO TR 4808-2021 PDF

ISO TR 4808-2021 PDF

Hydraulic fluid power-Interpolation method for particle count and filter test data

$48.00 $96.00 -50%
Product Code: ISO TR 4808
Stock In Stock
Edition: 1ST
Published: 02/2021
Number of Pages: 20
File Size: 1 file, 2 Bytes

Available Options

Product Description

Hydraulic fluid power – Interpolation method for particle count and filter test data

Introduction: The 2016 version of ISO 11171 provides options for reporting particle size in either units of µm(c) or µm(b). While mathematical conversion of µm(b) sizes to µm(c) sizes is straightforward, there is no such universal means for converting particle concentrations or filter Beta Ratios. This is problematic when attempting to comply with contamination control and filter performance specifications given in integral units of µm(c) when data are in integral units of µm(b) corresponding to decimal point µm(c) sizes, or vice versa. For example, particle sizes of 4 µm(b), 6 µm(b), 14 µm(b) and 21 µm(b), correspond to sizes of 3,6 µm(c), 5,4 µm(c), 12,6 µm(c) and 18,9 µm(c), respectively. In the absence of a common interpolation method, otherwise acceptable fluid and filter products can be deemed unacceptable for use because of a discrepancy in the particle sizes reported. This document describes a recommended method for converting µm(b) data to µm(c) data and for interpolating particle concentration, Beta Ratio, and removal efficiency data. The resultant interpolated values can be used to convert cleanliness level or filter performance specifications and data from µm(b) to µm(c). © ISO 2021 – All rights reserved

Scope: This document describes a recommended method for the interpolation of particle concentration and filter Beta Ratio data when results are not otherwise available at the desired particle sizes. It is applicable for assessing conformance with existing fluid cleanliness and filter Beta Ratio specifications whereby the specification and actual test results are provided in different units of particle size, for example, the specification is in µm(c), but the particle counts or Beta Ratio data are in units of µm(b). This document is also applicable when particle sizes in specifications and available data use the same units of particle size, but do not correspond to exactly the same sizes, for example, when particle counts at 20 µm(c) are specified, but data was collected at 21 µm(c). This method allows interpolation to intermediate particle sizes within the range of existing data and does not permit extrapolation to particle sizes outside the range of available data.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO TR 4808-2021 PDF

ISO TR 4808-2021 PDF

$48.00 $96.00