ISO TR 6336-31-2018 PDF

ISO TR 6336-31-2018 PDF

Calculation of load capacity of spur and helical gears - Part 31: Calculation examples of micropitting load capacity

$129.00 $258.00 -50%
Product Code: ISO TR 6336-31
Stock In Stock
Edition: 1ST
Published: 09/2018
Number of Pages: 56
File Size: 1 file, 3 Bytes

Available Options

Product Description

Calculation of load capacity of spur and helical gears - Part 31: Calculation examples of micropitting load capacity

Introduction: The ISO 6336 series consists of International Standards, Technical Specifications (TS) and Technical Reports (TR) under the general title Calculation of load capacity of spur and helical gears (see Table 1). — International Standards contain calculation methods that are based on widely accepted practices and have been validated. — TS contain calculation methods that are still subject to further development. — TR contain data that is informative, such as example calculations. The procedures specified in ISO 6336-1 to ISO 6336-19 cover fatigue analyses for gear rating. The procedures described in ISO 6336-20 to ISO 6336-29 are predominantly related to the tribological behaviour of the lubricated flank surface contact. ISO 6336-30 to ISO 6336-39 include example calculations. The ISO 6336 series allows the addition of new parts under appropriate numbers to reflect knowledge gained in the future. Requesting standardized calculations according to ISO 6336 without referring to specific parts requires the use of only those parts that are currently designated as International Standards (see Table 1 for listing). When requesting further calculations, the relevant part or parts of ISO 6336 need to be specified. Use of a Technical Specification as acceptance criteria for a specific design needs to be agreed in advance between manufacturer and purchaser. Table 1 — Overview of ISO 6336 Calculation of load capacity of spur and helical gears International Standard Technical Specification Tec

Scope: The example calculations presented here are provided for guidance on the application of the technical specification ISO/TS 6336-22 only. Any of the values or the data presented should not be used as material or lubricant allowables or as recommendations for micro-geometry in real applications when applying this procedure. The necessary parameters and allowable film thickness values, λGFP, should be determined for a given application in accordance with the procedures defined in ISO/TS 6336-22.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO TR 6336-31-2018 PDF

ISO TR 6336-31-2018 PDF

$129.00 $258.00