ASTM A1016/A1016M-24a PDF

ASTM A1016/A1016M-24a PDF

Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes

$40.00 $80.00 -50%
Product Code: ASTM A1016/A1016M
Stock In Stock
Published: 2024
Number of Pages: 12

Available Options

Product Description

This specification covers general requirements for ferritic alloy steel, austenitic alloy steel, and stainless steel tubes. The steel shall made by any process. The material shall conform to the tensile property requirements prescribed in the individual product specification. Yield strength tests and elongation tests shall be made to conform to the requirements. Flattening test, reverse flattening test, reverse bend test, flaring test, flange test, hardness test, ultrasonic test, eddy current test, flux leakage test, and hydrostatic test shall be made to conform to the requirements specified.
 Scope
 1.1  This specification covers a group of requirements that, unless otherwise specified in an individual specification, shall apply to the ASTM product specifications noted below.
 Title of Specification
 ASTM Designation A
 Seamless Carbon-Molybdenum Alloy-Steel Boiler and  Superheater Tubes
 A209/A209M
 Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater,  and Heat-Exchanger Tubes
 A213/A213M
 Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger,  and Condenser Tubes
 A249/A249M
 Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and  Superheater Tubes
 A250/A250M
 Seamless and Welded Ferritic and Martensitic Stainless Steel  Tubing for General Service
 A268/A268M
 Seamless and Welded Austenitic Stainless Steel Tubing for  General Service
 A269/A269M
 Seamless and Welded Austenitic and Ferritic/Austenitic  Stainless Steel Sanitary Tubing
 A270/A270M
 Seamless and Welded Carbon and Alloy-Steel Tubes for  Low-Temperature Service
 A334/A334M
 Welded Austenitic Stainless Steel Feedwater Heater Tubes
 A688/A688M
 Austenitic Stainless Steel Tubing for Breeder Reactor Core  Components
 A771/A771M
 Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing  for General Service
 A789/A789M
 Seamless and Welded Ferritic Stainless Steel Feedwater Heater  Tubes
 A803/A803M
 Seamless Austenitic and Martensitic Stainless Steel Duct  Tubes for Liquid Metal-Cooled Reactor Core Components
 A826/A826M
 High-Frequency Induction Welded, Unannealed, Austenitic  Steel Condenser Tubes
 A851
 Welded Austenitic Alloy Steel Boiler, Superheater, Condenser,  and Heat Exchanger Tubes with Textured Surface(s)
 A1098/A1098M
 1.2  In the case of conflict between a requirement of a product specification and a requirement of this general requirements specification, the product specification shall prevail. In the case of conflict between a requirement of the product specification or a requirement of this general requirements specification and a more stringent requirement of the purchase order, the purchase order shall prevail.
 1.3  The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. The inch-pound units shall apply unless the “M” designation (SI) of the product specification is specified in the order.
 1.4   This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ASTM A1016/A1016M-24a PDF

ASTM A1016/A1016M-24a PDF

$40.00 $80.00