ASTM A269/A269M-25 PDF

ASTM A269/A269M-25 PDF

Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service

$36.00 $72.00 -50%
Product Code: ASTM A269/A269M
Stock In Stock
Published: 2025
Number of Pages: 7

Available Options

Product Description

This specification covers nominal-wall-thickness, seamless and welded austenitic steel tubing for general corrosion-resisting and low- or high-temperature service. All material shall be furnished in the heat-treated condition. The steel shall conform to the chemical composition requirements. Different mechanical test requirements that includes, flaring test, flange test, hardness test, and reverse flattening test are presented. Also, each tube shall be subjected to the non-destructive electric test or the hydrostatic test. Finally the hardness requirements for different grades of tubes are highlighted.
 Scope
 1.1  This specification covers grades of nominal-wall-thickness, stainless steel tubing for general corrosion-resisting and low- or high-temperature service, as designated in Table 1 .
 Grade
 Composition, %
 TP
 XM-29
 . . .
 . . .
 . . .
 . . .
 . . .
 . . .
 . . .
 . . .
 . . .
 . . .
 . . .
 . . .
 . . .
 . . .
 . . .
 . . .
 . . .
 . . .
 . . .
 UNS Designation A
 S24000
 S31254
 S31266
 S31725
 S31726
 S31727
 S32053
 S30600 A
 S32654
 S34565
 S35045
 S35030
 N08367
 N08925
 N08926
 N08904
 N08028
 N08029
 N08330
 N08332
 Carbon
 0.08
 0.020
 0.030 max
 0.035
 0.035
 0.030
 0.030
 0.018
 0.020
 0.030
 0.06– 0.10
 0.05– 0.10
 0.030
 0.020
 0.020
 0.020
 0.030
 0.020
 0.08
 0.05– 0.10
 Manganese
 11.5– 14.5
 1.00
 2.00– 4.00
 2.00
 2.00
 1.00
 1.00
 2.0
 2.0– 4.0
 5.0– 7.0
 1.50
 1.50
 2.00
 1.00
 2.00
 2.00
 2.50
 2.0
 2.00
 2.00
 Phosphorus
 0.060
 0.030
 0.035
 0.045
 0.045
 0.030
 0.030
 0.020
 0.030
 0.030
 0.045
 0.030
 0.040
 0.045
 0.030
 0.040
 0.030
 0.025
 0.03
 0.03
 Sulfur
 0.030
 0.015
 0.020
 0.030
 0.030
 0.030
 0.010
 0.020
 0.005
 0.010
 0.015
 0.015
 0.030
 0.030
 0.010
 0.030
 0.030
 0.015
 0.03
 0.03
 Silicon
 1.00
 0.80
 1.00
 1.00
 1.00
 1.00
 1.00
 3.7– 4.3
 0.50
 1.00
 1.00
 0.50– 2.0
 1.00
 0.50
 0.50
 1.00
 1.0
 0.6
 0.75– 1.50
 0.75– 1.50
 Nickel
 2.3– 3.7
 17.5– 18.5
 21.0– 24.0
 13.5– 17.5
 14.5– 17.5
 14.5– 16.5
 24.0– 26.0
 14.0– 15.5
 21.0– 23.0
 16.0– 18.0
 32.0– 37.0
 22.5– 27.5
 23.5– 25.5
 24.0– 26.0
 24.0– 26.0
 23.0– 28.0
 30.0– 34.0
 30.0– 34.0
 34.0– 37.0
 34.0– 37.0
 Chromium
 17.0– 19.0
 19.5–
 20.5
 23.0– 25.0
 18.0– 20.0
 17.0– 20.0
 17.5– 19.0
 22.0– 24.0
 17.0– 18.5
 24.0– 25.0
 23.0– 25.0
 25.0– 29.0
 18.5– 22.5
 20.0– 22.0
 19.0– 21.0
 19.0– 21.0
 19.0–
 23.0
 26.0– 28.0
 26.0– 28.0
 17.0– 20.0
 17.0– 20.0
 Molybdenum
 ...
 6.0– 6.5
 5.2– 6.2
 4.0– 5.0
 4.0– 5.0
 3.8– 4.5
 5.0– 6.0
 0.20
 max
 7.0– 8.0
 4.0– 5.0
 . . .
 6.0– 7.0
 6.0– 7.0
 6.0– 7.0
 4.0– 5.0
 3.0– 4.0
 4.0– 5.0
 . . .
 . . .
 Titanium
 . . .
 . . .
 . . .
 . . .
 . . .
 . . .
 . . .
 . . .
 . . .
 . . .
 0.15– 0.60
 . . .
 . . .
 . . .
 . . .
 . . .
 . . .
 . . .
 . . .
 . . .
 Niobium G
 . . .
 . . .
 . . .
 . . .
 . . .
 . . .
 . . .
 . . .
 . . .
 0.10
 max
 . . .
 0.25– 0.75
 . . .
 . . .
 . . .
 . . .
 . . .
 . . .
 . . .
 . . .
 Tantalum
 . . .
 . . .
 . . .
 . . .
 . . .
 . . .
 . . .
 . . .
 . . .
 . . .
 . . .
 . . .
 . . .
 . . .
 . . .
 . . .
 . . .
 . . .
 Nitrogen F
 0.20– 0.40
 0.18– 0.25
 0.35– 0.60
 0.20 max
 0.10– 0.20
 0.15– 0.21
 0.17– 0.22
 0.45–
 0.55
 0.40– 0.60
 . . .
 0.05– 0.15
 0.18– 0.25
 0.10– 0.20
 0.15– 0.25
 0.10 max
 . . .
 . . .
 . . .
 . . .
 Vanadium
 . . .
 . . .
 . . .
 . . .
 . . .
 . . .
 . . .
 . . .
 . . .
 . . .
 . . .
 . . .
 . . .
 . . .
 . . .
  Copper
 . . .
 0.50– 1.00
 1.00– 2.50
 . . .
 . . .
 2.8– 4.0
 . . .
 0.50
 max
 0.30– 0.60
 . . .
 0.75
 2.5– 3.5
 0.75 max
 0.80– 1.50
 0.50– 1.50
 1.00– 2.00
 0.6– 1.4
 0.6– 1.4
 1.00
 1.00
  Others
 . . .
 . . .
 W 1.50– 2.50
 . . .
 . . .
 . . .
 . . .
 . . .
 . . .
 . . .
 Al
 0.15– 0.60
 . . .
 . . .
 . . .
 . . .
 . . .
 . . .
 . . .
 Pb 0.005 Sn 0.025
 Pb 0.005 Sn 0.025
 1.2  The tubing sizes and thicknesses usually furnished to this specification are 1 / 4  in. [6.4 mm] in inside diameter and larger and 0.020 in. [0.51 mm] in nominal wall-thickness and heavier.
 1.3  Mechanical property requirements do not apply to tubing smaller than 1 / 8  in. [3.2 mm] in inside diameter or 0.015 in. [0.38 mm] in thickness.
 Note 1:   Additional testing requirements may apply for use in ASME B31.3 applications.
 1.4  Optional supplementary requirements are provided and, when one or more of these are desired, each shall be so stated in the order.
 1.5  The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. The inch-pound units shall apply unless the “M” designation of this specification is specified in the order.
 1.6   This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ASTM A269/A269M-25 PDF

ASTM A269/A269M-25 PDF

$36.00 $72.00