ASTM A672/A672M-19(2025) PDF

ASTM A672/A672M-19(2025) PDF

Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures

$36.00 $72.00 -50%
Product Code: ASTM A672/A672M
Stock In Stock
Published: 2025
Number of Pages: 7

Available Options

Product Description

This specification covers electrical-fusion-welded steel pipe for high-pressure service at moderate temperatures. Heat treatment may or may not be required to attain the desired properties or to comply with applicable code requirements. An analysis of each mill heat of plate material shall be made, also, an analysis of the finished deposited weld material from each 500 ft or fraction thereof shall be made. The mechanical test requirements includes one tension test specimen to represent each lot of finished pipe, and one transverse-guided-weld-bend test (two specimens) to represent each lot of finished pipe. Also, radiographic examination shall be made on the full length of each weld.
 Scope
 1.1  This specification 2 covers steel pipe: electric-fusion-welded with filler metal added, fabricated from pressure-vessel quality plate of any of several analyses and strength levels and suitable for high-pressure service at moderate temperatures. Heat treatment may or may not be required to attain the desired properties or to comply with applicable code requirements. Supplementary requirements are provided for use when additional testing or examination is desired.
 1.2  The specification nominally covers pipe 16 in. [400 mm] in outside diameter or larger with wall thicknesses up to 3 in. [75 mm], inclusive. Pipe having other dimensions may be furnished provided it complies with all other requirements of this specification.
 1.3  Several grades and classes of pipe are provided.
 1.3.1   Grade  designates the type of plate used.
 1.3.2   Class  designates the type of heat treatment performed during manufacture of the pipe, whether the weld is radiographically examined, and whether the pipe has been pressure tested as listed in 1.3.3 .
 1.3.3  Class designations are as follows ( Note 1 ):
 Class
 Heat Treatment on Pipe
 Radiography, see Section
 Pressure Test, see Section
 10
 none
    none
    none
 11
 none
     9
    none
 12
 none
     9
     8.3
 13
 none
    none
     8.3
 20
 stress relieved, see 5.3.1
    none
    none
 21
 stress relieved, see 5.3.1
     9
    none
 22
 stress relieved, see 5.3.1
     9
     8.3
 23
 stress relieved, see 5.3.1
    none
     8.3
 30
 normalized, see 5.3.2
    none
    none
 31
 normalized, see 5.3.2
     9
    none
 32
 normalized, see 5.3.2
     9
     8.3
 33
 normalized, see 5.3.2
    none
     8.3
 40
 normalized and tempered, see 5.3.3
    none
    none
 41
 normalized and tempered, see 5.3.3
     9
    none
 42
 normalized and tempered, see 5.3.3
     9
     8.3
 43
 normalized and tempered, see 5.3.3
    none
     8.3
 50
 quenched and tempered, see 5.3.4
    none
    none
 51
 quenched and tempered, see 5.3.4
     9
    none
 52
 quenched and tempered, see 5.3.4
     9
     8.3
 53
 quenched and tempered, see 5.3.4
    none
     8.3
 Note 1:   Selection of materials should be made with attention to temperature of service. For such guidance, Specification A20/A20M may be consulted.
 1.4  The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. The inch-pound units shall apply unless the “M” designation of this specification is specified in the order.
 1.5   This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ASTM A672/A672M-19(2025) PDF

ASTM A672/A672M-19(2025) PDF

$36.00 $72.00