ASTM A74-26 PDF

ASTM A74-26 PDF

Standard Specification for Cast Iron Soil Pipe and Fittings

$56.50 $113.00 -50%
Product Code: ASTM A74
Stock In Stock
Published: 2026
Number of Pages: 46

Available Options

Product Description

This specification covers cast gray iron soil pipe and fittings for use in gravity flow plumbing, drain, waste and vent sanitary, and storm water applications. These pipe and fittings are not intended for pressure applications. The cast iron shall be produced by an established commercial method that provides control over chemical and physical properties. Castings shall be sound, true to pattern, and of compact close grain that permits drilling and cutting by ordinary methods and its interior surface shall be reasonably smooth and free from defects. Ferrous scrap, pig iron, and any recycled ferrous material to be used in the melting operation shall be screened for radioactivity. Tension test shall include breaking load, machined diameter, and tensile strength. Chemical test shall conform to the chemical composition requirements prescribed for phosphorous, sulfur, chromium, titanium, aluminum, lead, and carbon equivalent. Dimension requirements for hub, spigot, barrel, grooves, water seal and trap, and threads of the pipe and fittings are detailed. The pipe and fittings shall be uniformly coated with a material suitable for the purpose.
 Scope
 1.1  This specification covers cast iron soil pipe and fittings for use in gravity flow plumbing, drain, waste and vent sanitary, and storm water applications. It establishes standards covering material, manufacture, mechanical and chemical properties, coating, test methods, inspection, certification, product markings, dimensions, and dimensional tolerances for extra-heavy and service cast iron soil pipe and fittings. These pipe and fittings are not intended for pressure applications as the selection of the proper size for sanitary drain, waste, vent, and storm drain systems allows free air space for gravity drainage.
 1.2  This specification covers pipe and fittings of the following patterns and, when so designated, shall apply to any other patterns that conform with the dimensions found in Tables 1 and 2 and all other applicable requirements given in this specification.
 1.2.1   Pipe:
 Tables
 Extra heavy, 2 1 / 2  ft (0.75 m), 3 1 / 2  ft (1.0 m), 5 ft (1.5 m), 10 ft (3.0 m) lengths
 1, 2
 Service, 2 1 / 2  ft (0.75 m), 3 1 / 2  ft (1.0 m), 5 ft (1.5 m), 10 ft (3.0 m)
 1, 2
 Outside dimensions (for detailing)
 X1.1
 1.2.2   Fittings:
 Tables
 1 / 4  bends; long 1 / 4  bends
 3, 4
 1 / 4  bends, long low-hub
 5
 1 / 4  bends, low heel; high heel
 6, 7
 1 / 4  bends, short sweep; long sweep
 8
 1 / 4  bends, reducing long sweep
 9
 1 / 5  bends
 10
 1 / 6  bends
 10
 1 / 8  bends; long 1 / 8  bends
 11
 1 / 16  bends
 11
 Y branches
 12, 13
 Y branches, combination 1 / 8  bends, single
 14
 Y branches, combination 1 / 8  bends, double
 14
 Sanitary T branches, single
 15
 Sanitary T branches, double
 15
 Sanitary T branches, cleanout
 16
 Tapped sanitary T branches, single
 17
 Tapped sanitary T branches, double
 17
 T branches, single and double
 18
 Tapped T branches, single
 19
 Tapped T branches, double
 19
 T branches, cleanout
 20
 –45° offset fitting
 21
 Double hubs
 22
 Long double hubs
 22
 Reducers
 23
 Increasers
 24, 25
 P traps
 26, 27
 Deep seal P traps
 28
 Running traps
 29
 Screw plugs (brass)
 30
 Blind plugs
 31
 Iron-body ferrules
 32
 Side inlets
 Fig. 3
 Closet bends
 33
 Tapping bosses
 34
 Reducing 1 / 4  bend SV
 35
 Combination Y and 1 / 8  bend
 36
 ‘H’ branch fitting
 37
 1.3  The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
 1.4   This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ASTM A74-26 PDF

ASTM A74-26 PDF

$56.50 $113.00