ASTM A861-04(2023) PDF

ASTM A861-04(2023) PDF

Standard Specification for High-Silicon Iron Pipe and Fittings

$52.00 $104.00 -50%
Product Code: ASTM A861
Stock In Stock
Published: 2023
Number of Pages: 26

Available Options

Product Description

This specification covers high-silicon iron pipe and pipe fittings intended for corrosion-resistant service for both above- and below-grade construction. The castings shall be true to pattern, reasonable smooth, and free from defects that would make the castings unfit for the use for which they are intended. The material shall conform to the chemical composition requirements specified. All centrifugally cast high-silicon iron pipe shall be supplied in the as-cast condition. All other pipe and fittings shall be supplied in the stress-relieved condition; the stress relieving procedures are presented. Acid-proof joints for hub/plain-end pipe shall require the use of an acid-proof rope packing. No-hub pipe and fittings shall require a special acid resistant mechanical joint coupling. High-silicon iron pipe can be cut with either manual or hydraulic snap cutters. Hydrostatic testing shall be conducted on all castings.
 Scope
 1.1  This specification covers high-silicon iron pipe and pipe fittings intended for corrosion-resistant service for both above- and below-grade construction.
 1.2  The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
 1.3  Pipe and pipe fittings shall be the no-hub (MJ) or the hub and plain-end design.
 1.4  Pipe and pipe fittings shall be of the sizes specified in Table 1 and Table 2 and Figs. 1–71 or other sizes that shall be permitted to conform to the requirements given herein.
 1.4.1   Pipe:  
 1.4.1.1   No-Hub (MJ) (Fig. 1):  
 Size (in.)
 Length (ft)
 1 1 / 2 
 7
 2
 7
 3
 7
 4
 7
 1.4.1.2   Hub/Plain End (Fig. 35):  
 Size (in.)
 Length (ft)
  2
 7
  3
 7
  4
 7
  6
 7
  8
 7
 10
 5
 12
 5
 15
 5
 1.4.2   Fitting (No-Hub) (MJ):
 Figs.
 Quarter Bends
 2
 Sixth Bends
 3
 Return Bends
 4
 Double-Branch Quarter Bend
 5
 Eighth Bends
 6
 Sixteenth Bends
 7
 Long-Sweep Quarter Bends
 8
 Sanitary Y Branches
 9
 Double-Branch Sanitary Y
 10
 Sanitary Combination Y and 1 / 8  Bend
 11
 Double-Branch Sanitary Combination Y and 1 / 8  Bend
 12
 Sanitary T Branches
 13
 Double Branch Sanitary T
 14
 Sanitary Running Traps
 15
 Sanitary P Traps
 16
 Swivel Trap P-Style, Short
 17
 Swivel Trap P-Style, Long
 18
 Swivel Trap S-Style, Long
 19
 Centrifugal Drum Trap P Swivel Type
 20
 Centrifugal Drum Trap S Swivel Type
 21
 Combination Cleanout and Test Tees
 22
 Coupling
 23
 Pipe Plugs
 24
 Cleanout Plugs
 25
 No-Hub (MJ) Adapter
 26
 Reducers-Increasers
 27
 Sink Outlet
 28
 Sink Overflows
 29
 Threaded Adapters
 30
 Trap Cleanout Details
 31
 No-Hub (MJ) Adapter
 32
 (MJ) (No-Hub) to Lead Adapter
 33
 Floor Drains
 34
 1.4.3   Fitting (Hub/Plain End):  
 Figs.
 Hub Plain-End Pipe
 35
 Straight Tees
 36
 Sanitary T Branches
 37
 Sanitary Y Branches
 38
 Double-Branch Sanitary Tee
 39
 Double-Branch Sanitary Y
 40
 Double-Branch Sanitary Combination Y and 1 / 8  Bend (T-Y)
 41
 Short-Sweep Quarter Bends
 42
 Long-Sweep Quarter Bends
 43
 Sanitary Combination Y and 1 / 8  Bend (T-Y)
 44
 Quarter Bends
 45
 Sixth Bends
 46
 Eighth Bends
 47
 Sixteenth Bends
 48
 Sanitary Increasers
 49
 Hub Strainers
 50
 Sanitary Reducers
 51
 Double Hubs
 52
 Pipe Plugs
 53
 Cleanout Plugs
 54
 Adapter – Plain end to Split Flange
 55
 Adapter – Hub to Split Flange
 56
 Combination Cleanout and Test Tees
 57
 Insertable Joints
 58
 Backwater Valves
 59
 Sanitary P Traps
 60
 Sanitary S Traps
 61
 Sanitary Running Traps
 62
 Floor Drains
 63, 64, 65
 Floor Drains
 66
 Floor Drains/Installation – Funnel Attachment
 67, 68
 Overflow
 69
 Sink Outlet
 70
 Detailed Cross Section of Cleanout
 71
 Chemical Composition
 Table 3
 Transverse Bend Test Minimum Requirements
 Table S1.1
 1.5   This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ASTM A861-04(2023) PDF

ASTM A861-04(2023) PDF

$52.00 $104.00