ASTM A20/A20M-20 PDF

ASTM A20/A20M-20 PDF

Standard Specification for General Requirements for Steel Plates for Pressure Vessels

$52.00 $104.00 -50%
Product Code: ASTM A20/A20M
Stock In Stock
Published: 2020
Number of Pages: 34

Available Options

Product Description

This specification covers a group of common requirements that apply to rolled steel plates for pressure vessels. The steel shall be made in an open-hearth, basic-oxygen, or electric-arc furnace process. Sampling and methods for chemical analysis are discussed. Yield strength tests, tension tests, and notch-toughness tests shall be made in accordance to the product specification to conform to the specified requirements.
 Scope
 1.1  This general requirements specification 2 covers a group of common requirements that, unless otherwise specified in the applicable product specification, apply to rolled steel plates for pressure vessels covered by each of the following product specifications issued by ASTM:
 Title of Specification
 ASTM Designation A
 Pressure Vessel Plates, Alloy Steel, Nickel
 A203/A203M
 Pressure Vessel Plates, Alloy Steel, Molybdenum
 A204/A204M
 Pressure Vessel Plates, Alloy Steel, Manganese-  Vanadium-Nickel
 A225/A225M
 Stainless Chromium Steel-Clad Plate
 A263
 Stainless Chromium-Nickel Steel-Clad Plate
 A264
 Nickel and Nickel-Base Alloy-Clad Steel Plate
 A265
 Pressure Vessel Plates, Carbon Steel, Low- and  Intermediate-Tensile Strength
 A285/A285M
 Pressure Vessel Plates, Carbon Steel, Manganese-Silicon
 A299/A299M
 Pressure Vessel Plates, Alloy Steel, Manganese-  Molybdenum and Manganese-Molybdenum-Nickel
 A302/A302M
 Pressure Vessel Plates, Alloy Steel, Double-  Normalized and Tempered 9 % Nickel
 A353/A353M
 Pressure Vessel Plates, Alloy Steel, Chromium-  Molybdenum
 A387/A387M
 Pressure Vessel Plates, Carbon Steel, High Strength  Manganese
 A455/A455M
 Pressure Vessel Plates, Carbon Steel, for Intermediate-  and Higher-Temperature Service
 A515/A515M
 Pressure Vessel Plates, Carbon Steel, Moderate- and  Lower-Temperature Service
 A516/A516M
 Pressure Vessel Plates, Alloy Steel, High-Strength,  Quenched and Tempered
 A517/A517M
 Pressure Vessel Plates, Alloy Steel, Quenched and  Tempered, Manganese-Molybdenum and Manganese-  Molybdenum-Nickel
 A533/A533M
 Title of Specification
 ASTM Designation A
 Pressure Vessel Plates, Heat-Treated, Carbon-  Manganese-Silicon Steel
 A537/A537M
 Pressure Vessel Plates, Alloy Steel, Quenched-and-  Tempered, Chromium-Molybdenum, and Chromium-  Molybdenum-Vanadium
 A542/A542M
 Pressure Vessel Plates, Alloy Steel, Quenched and  Tempered Nickel-Chromium-Molybdenum
 A543/A543M
 Pressure Vessel Plates, Alloy Steel, Quenched and  Tempered 7, 8, and 9 % Nickel
 A553/A553M
 Pressure Vessel Plates, Carbon Steel, Manganese-  Titanium for Glass or Diffused Metallic Coatings
 A562/A562M
 Pressure Vessel Plates, Carbon Steel, High Strength, for  Moderate and Lower Temperature Service
 A612/A612M
 Pressure Vessel Plates, 5 % and 5 1 / 2  % Nickel Alloy  Steels, Specially Heat Treated
 A645/A645M
 Pressure Vessel Plates, Carbon-Manganese-Silicon  Steel, for Moderate and Lower Temperature Service
 A662/A662M
 Pressure Vessel Plates, Carbon-Manganese-Silicon  Steel, Quenched and Tempered, for Welded Pressure  Vessels
 A724/A724M
 Pressure Vessel Plates, Low-Carbon Age-Hardening  Nickel-Copper-Chromium-Molybdenum-Columbium  (Niobium) Alloy Steel
 A736/A736M
 Pressure Vessel Plates, High-Strength Low-Alloy Steel
 A737/A737M
 Pressure Vessel Plates, Heat-Treated, Carbon-  Manganese-Silicon Steel, for Moderate and Lower  Temperature Service
 A738/A738M
 Pressure Vessel Plates, Alloy Steel, Chromium-  Molybdenum-Vanadium
 A832/A832M
 Steel Plates for Pressure Vessels, Produced by  Thermo-Mechanical Control Process (TMCP)
 A841/A841M
 Steel Plates, 9 % Nickel Alloy, for Pressure Vessels,  Produced by the Direct-Quenching Process
 A844/A844M
 Pressure Vessel Plates, Alloy Steel, Chromium-  Molybdenum-Tungsten
 A1017/A1017M
 1.1.1  This general requirements specification also covers a group of supplementary requirements that are applicable to several of the above product specifications as indicated therein. Such requirements are provided for use if additional testing or additional restrictions are required by the purchaser, and apply only if specified individually in the purchase order.
 1.2   Appendix X1 provides information on coil as a source of plates for pressure vessels.
 1.3   Appendix X2 provides information on the variability of tensile properties in plates for pressure vessels.
 1.4   Appendix X3 provides information on the variability of Charpy-V-Notch impact test properties in plates for pressure vessels.
 1.5   Appendix X4 provides information on cold bending of plates, including suggested minimum inside radii for cold bending.
 1.6  These materials are intended to be suitable for fusion welding. When the steel is to be welded, it is presupposed that a welding procedure suitable for the grade of steel and intended use or service will be utilized.
 1.7  In case of any conflict in requirements, the requirements of the applicable product specification prevail over those of this general requirements specification.
 1.8  Additional requirements that are specified in the purchase order and accepted by the supplier are permitted, provided that such requirements do not negate any of the requirements of this general requirements specification or the applicable product specification.
 1.9  For purposes of determining conformance with this general requirements specification and the applicable product specification, values are to be rounded to the nearest unit in the right-hand place of figures used in expressing the limiting values in accordance with the rounding method of Practice E29 .
 1.10  The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
 1.11  This general requirements specification and the applicable product specification are expressed in both inch-pound units and SI units; unless the order specifies the applicable “M” specification designation (SI units), the plates are to be furnished to inch-pound units.
 1.12   This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ASTM A20/A20M-20 PDF

ASTM A20/A20M-20 PDF

$52.00 $104.00