ASTM A268/A268M-24 PDF

ASTM A268/A268M-24 PDF

Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service

$36.00 $72.00 -50%
Product Code: ASTM A268/A268M
Stock In Stock
Published: 2024
Number of Pages: 7

Available Options

Product Description

This guide covers standard specification for a number of grades of nominal-wall-thickness, welded ferritic and martensitic stainless steel tubing for general corrosion-resisting and high-temperature service. The steel shall conform to the required chemical composition for carbon, manganese, phosphorus, sulfur, silicon, nickel, chromium, molybdenum, aluminum, copper, nitrogen, titanium, and columbium. The number of tubes in a lot heat treated by the continuous process shall be determined from the size of the tubes. The steel shall conform to the following tensile properties: tensile strength, yield strength, and elongation. The tubes shall have a hardness number that will not exceed the prescribed Brinell and Rockwell hardness values. Several mechanical tests shall be conducted, namely: tension test; flaring test (for seamless tubes); flange test (for welded tubes); hardness test; reverse flattening test; intergranular corrosion test; and hydrostatic or nondestructive electric test.
 Scope
 1.1  This specification 2 covers a number of grades of nominal-wall-thickness, stainless steel tubing for general corrosion-resisting and high-temperature service. Most of these grades are commonly known as the “straight-chromium” types and are characterized by being ferromagnetic. Two of these grades, TP410 and UNS S 41500 ( Table 1 ), are amenable to hardening by heat treatment, and the high-chromium, ferritic alloys are sensitive to notch-brittleness on slow cooling to ordinary temperatures. These features should be recognized in the use of these materials.
 TABLE 1    Continued
 Grade
 TP439
 . . .
 . . .
 TP430 Ti
 TP XM-27
 TP XM-33 A
 18Cr-2Mo
 29-4
 29-4-2
 26-3-3
 25-4-4
 ...
 . . .
 . . .
 . . .
 . . .
 TP468
 UNS Designation
 S43035
 S43932
 S41500 B
 S43036
 S44627
 S44626
 S44400
 S44700
 S44800
 S44660
 S44635
 S44735
 S32803
 S40977
 S43940
 S42035
 S46800
 Element
 Composition, %
 C, max
 0.07
 0.030
 0.05
 0.10
 0.01 A
 0.06
 0.025
 0.010
 0.010
 0.030
 0.025
 0.030
 0.015 C
 0.03
 0.03
 0.08
 0.030
 Mn, max
 1.00
 1.00
 0.5–1.0
 1.00
 0.40
 0.75
 1.00
 0.30
 0.30
 1.00
 1.00
 1.00
 0.5
 1.50
 1.00
 1.00
 1.00
 P, max
 0.040
 0.040
 0.03
 0.040
 0.02
 0.040
 0.040
 0.025
 0.025
 0.040
 0.040
 0.040
 0.020
 0.040
 0.040
 0.045
 0.040
 S, max
 0.030
 0.030
 0.03
 0.030
 0.02
 0.020
 0.030
 0.020
 0.020
 0.030
 0.030
 0.030
 0.005
 0.015
 0.015
 0.030
 0.030
 Si, max
 1.00
 1.00
 0.60
 1.00
 0.40
 0.75
 1.00
 0.20
 0.20
 1.00
 0.75
 1.00
 0.50
 1.00
 1.00
 1.00
 1.00
 Ni
 0.50 max
 0.50
 3.5–5.5
 0.75 max
 0.5 D max
 0.50 max
 1.00 max
 0.15 max
 2.0–2.5
 1.0–3.50
 3.5–4.5
 1.00 max
 3.0–4.0
 0.30–1.00
 . . .
 1.0–2.5
 0.50
 Cr
 17.00–
 17.0–19.0
 11.5–14.0
 16.00–
 25.0–27.5
 25.0–27.0
 17.5–19.5
 28.0–30.0
 28.0–30.0
 25.0–28.0
 24.5–26.0
 28.00–
 28.0– 29.0
 10.50– 12.50
 17.50– 18.50
 13.5– 15.5
 18.00– 20.00
  19.00
  19.50
  30.00
 Mo
 ...
 ...
 0.5–1.0
 ...
 0.75–1.50
 0.75–1.50
 1.75–2.50
 3.5–4.2
 3.5–4.2
 3.0–4.0
 3.5–4.5
 3.60–4.20
 1.8–2.5
 . . .
 . . .
 0.2–1.2
 . . .
 Al, max
 0.15
 0.15
 . . .
 ...
 ...
 ...
 ...
 ...
 ...
 ...
 ...
 ...
 . . .
 . . .
 . . .
 . . .
 . . .
 Cu, max
 ...
 ...
 . . .
 ...
 0.2
 0.20
 ...
 0.15
 0.15
 ...
 ...
 ...
 . . .
 . . .
 . . .
 . . .
 . . .
 N, max
 0.04
 0.030
 . . .
 ...
 0.015
 0.040
 0.035
 0.020 E
 0.020 E
 0.040
 0.035
 0.045
 0.020
 0.030
 . . .
 . . .
 0.030
 Ti
 0.20 + 4 (C
 . . .
 5 × C min;
 ...
 7 × (C + N)
 ...
 ...
 ...
 ...
 ...
 ...
 . . .
 . . .
 0.10–0.60
 0.30–0.50
 0.07–0.30
  + N) min;
  0.75 max
 but no less
  1.10 max
  than 0.20
  min; 1.00
  max
 Nb G
 ...
 . . .
 ...
 0.05–0.20
 ...
 ...
 ...
 ...
 ...
 ...
 ...
 0.15– 0.50 F
 . . .
 (3 × %C + 0.30) min
 . . .
 0.10–0.60
 Other
 (Ti + Nb) = {0.20 + 4 × (C + N)} min.; 0.75 max
 (Ti + Nb) = 0.020 + 4 × (C + N) min; 0.80 max
 (Ti + Nb) = 0.20–1.00 and 6 × (C + N) min
 (Ti + Nb) = 0.020 + 4 × (C + N) min; 0.80 max
 (Ti + Nb) = 0.020– 1.00 and 6 × (C + N) min
 (Ti + Nb) = 0.020 + 4 × (C + N) min; 0.80 max
 1.2  An optional supplementary requirement is provided, and when desired, shall be so stated in the order.
 1.3  The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. The inch-pound units shall apply unless the “M” designation of this specification is specified in the order.
 1.4   This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ASTM A268/A268M-24 PDF

ASTM A268/A268M-24 PDF

$36.00 $72.00