ASTM B111/B111M-24 PDF

ASTM B111/B111M-24 PDF

Standard Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock

$40.00 $80.00 -50%
Product Code: ASTM B111/B111M
Stock In Stock
Published: 2024
Number of Pages: 12

Available Options

Product Description

This specification establishes the requirements for seamless tube and ferrule stock of copper and various copper alloys of a specified range of diameters, for use in surface condensers, evaporators, and heat exchangers. The specified coppers and copper alloys are UNS No. C10100, C10200, C10300, C10800, C12000, C12200, C14200, C19200, C23000, C28000, C44300, C44400, C44500, C60800, C61300, C61400, C68700, C70400, C70600, C70620, C71000, C71500, C71520, C71640, and C72200. The product shall be produced by processes such as casting, extrusion, drawing, annealing, straightening, trimming, and other processes which may produce a seamless tube in the specified condition. The coppers and copper alloys shall be specifically furnished in any one of the following tempers: annealed, light-drawn, hard-drawn, or hard drawn and end annealed. Tubes for ferrule stock shall be annealed sufficiently to be fully crystallized. Some tubes are suggested to be subjected to a stress-relieving thermal treatment subsequent to straightening. The products shall be subjected to expansion, flattening, and residual stress tests. The tensile and expansion requirements for the products are specified in accordance with the temper designation. The products shall also be subjected to mercurous nitrate, ammonia vapor, Eddy-current, hydrostatic, and pneumatic tests.
 Scope
 1.1  This specification 2 covers the requirements for seamless tube and ferrule stock of copper and various copper alloys up to 3 1 / 8  in. [80 mm] inclusive, in diameter, for use in surface condensers, evaporators, and heat exchangers. The following coppers and copper alloys are specified: 3
 Copper or Copper
 Alloy UNS No.
 Previously Used
 Designation
 Description
 C10100
 OFE
 Oxygen-free electronic
 C10200
 OF A
 Oxygen-free without residual deoxidants
 C10300
 . . .
 Oxygen-free, extra low phosphorus
 C10800
 . . .
 Oxygen-free, low phosphorus
 C12000
 DLP A
 Phosphorized, low residual phosphorus
 C12200
 DHP A
 Phosphorized, high residual phosphorus
 C14200
 DPA A
 Phosphorized, arsenical
 C15630
 . . .
 Nickel Phosphorus
 C19200
 . . .
 Phosphorized, 1 % iron
 C23000
 . . .
 Red Brass
 C28000
 . . .
 Muntz Metal
 C44300
 . . .
 Admiralty Metals, B, C, and D
 C44400
 . . .
 . . .
 C44500
 . . .
 . . .
 C60800
 . . .
 Aluminum Bronze
 C61300
 . . .
 . . .
 C61400
 . . .
 Aluminum Bronze, D
 C68700
 . . .
 Aluminum Brass, B
 C70400
 . . .
 95-5 Copper-Nickel
 C70600
 . . .
 90-10 Copper-Nickel
 C70620
 . . .
 90-10 Copper-Nickel—Welding Grade
 C71000
 . . .
 80-20 Copper-Nickel
 C71500
 . . .
 70-30 Copper-Nickel
 C71520
 . . .
 70-30 Copper-Nickel—Welding Grade
 Copper or Copper
 Alloy UNS No.
 Previously Used
 Designation
 Description
 C71640
 . . .
 Copper-nickel-iron-manganese
 C72200
 . . .
 . . .
 1.2   Units— The values stated in either inch-pound units or SI units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
 1.3   The following safety hazards caveat pertains only to the test method(s) portion in Section 17 of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. ( Warning— Mercury has been designated by many regulatory agencies as a hazardous substance that can cause serious medical issues. Mercury, or its vapor, has been demonstrated to be hazardous to health and corrosive to materials. Caution when handling mercury and mercury containing products. See the applicable product Safety Data Sheet (SDS) for additional information. Users should be aware that selling mercury or mercury containing products, or both, into your state or country may be prohibited by law.
 1.4   This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ASTM B111/B111M-24 PDF

ASTM B111/B111M-24 PDF

$40.00 $80.00