ASTM B956-19E01 PDF

ASTM B956-19E01 PDF

Standard Specification for Welded Copper and Copper-Alloy Condenser and Heat Exchanger Tubes with Integral Fins

$36.00 $72.00 -50%
Product Code: ASTM B956
Stock In Stock
Published: 2019
Number of Pages: 10

Available Options

Product Description

This specification establishes the requirements for forge-welded copper and copper alloy with integral fins for use in surface condenser, evaporator, and heat exchanger. The product shall be welded tube of one of the following Copper or Copper Alloy UNS Nos.: C12000, C12200, C19200, C23000, C44300, C44400, C44500, C68700, C70400, C70600, C70620, C71000, C71500, C71520, and C72200. The material heat identification or traceability shall be specified if required. The product shall be manufactured by cold forming to produce an integral enhanced surface for improved heat transfer and shall typically be furnished with unenhanced ends, but may be furnished with enhanced ends or stripped ends. Temper conditions (annealed, WO61 or light cold-worked, WC55) for the tubes and the enhanced and unenhanced sections of the tubes are given. The material shall conform to the chemical composition requirements prescribed for copper, tin, aluminum, nickel, cobalt, lead, iron, zinc, manganese, arsenic, antimony, phosphorus, chromium, and other elements such as carbon, sulfur, silicon, and titanium as determined by chemical analysis. Requirements for grain size, dimensions, mass, and mechanical properties including tensile strength and yield strength as determined by tension test are detailed. The performance requirements including expansion, flattening, and reverse bend tests; mercurous nitrate test or ammonia vapor test; and nondestructive tests such as eddy-current, hydrostatic, and pneumatic tests are detailed as well.
 Scope
 1.1  This specification establishes the requirements for heat exchanger tubes manufactured from forge-welded copper and copper alloy tubing in straight lengths on which the external or internal surface, or both, has been modified by cold forming process to produce an integral enhanced surface for improved heat transfer.
 1.2  The tubes are typically used in surface condensers, evaporators, and heat exchangers.
 1.3  The product shall be produced of the following coppers or copper alloys, as specified in the ordering information.
 Copper or Copper Alloy UNS No.
 Type of Metal
 C12000 A
 DLP Phosphorized, low residual phosphorus
 C12200 A
 DHP Phosphorized, high residual phosphorus
 C19200
 Phosphorized, 1 % iron
 C19400
 Copper-Iron Alloy
 C23000
 Red Brass
 C44300
 Admiralty, arsenical
 C44400
 Admiralty, antimonial
 C44500
 Admiralty, phosphorized
 C68700
 Aluminum Brass
 C70400
 95-5 Copper-Nickel
 C70600
 90-10 Copper-Nickel
 C70620
 90-10 Copper-Nickel (Modified for Welding)
 C71000
 80-20 Copper-Nickel
 C71500
 70-30 Copper-Nickel
 C71520
 70-30 Copper-Nickel (Modified for Welding)
 C72200
 Copper-Nickel
 Note 1:   Designations listed in Classification B224 .
 1.4   Units— The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
 1.5   The following safety hazard caveat pertains only to the test methods described in this specification.  This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
 1.6   Warning— Mercury has been designated by many regulatory agencies as a hazardous substance that can cause serious medical issues. Mercury, or its vapor, has been demonstrated to be hazardous to health and corrosive to materials. Use caution when handling mercury and mercury-containing products. See the applicable product Safety Data Sheet (SDS) for additional information. The potential exists that selling mercury or mercury-containing products, or both, is prohibited by local or national law. Users must determine legality of sales in their location.
 1.7   This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ASTM B956-19E01 PDF

ASTM B956-19E01 PDF

$36.00 $72.00