ASTM D501-03(2023) PDF

ASTM D501-03(2023) PDF

Standard Test Methods of Sampling and Chemical Analysis of Alkaline Detergents

$52.00 $104.00 -50%
Product Code: ASTM D501
Stock In Stock
Published: 2023
Number of Pages: 27

Available Options

Product Description

These test methods cover procedures for the sampling and chemical analysis of inorganic alkaline detergents. These detergents include caustic soda, soda ash, modified soda (sequicarbonate type), sodium bicarbonate, sodium metasilicate, trisodium phosphate, tetrasodium pyrophosphate, borax, and sodium triphosphate. Different tests shall be conducted in order to determine the following properties of the detergents: total alkalinity, matter insoluble in water content, apparent density, ignition loss, pH level, turbidity, temperature rise, and particle size. Chemical analysis of the samples shall be performed by using either reverse-flow ion-exchange chromatography or paper chromatography.
 Scope
 1.1  These test methods cover procedures for the sampling and chemical analysis of inorganic alkaline detergents.
 1.2  The procedures appear in the following order:
 Sections
 Caustic Soda:
  Sampling
 5
  Total Alkalinity as Sodium Oxide (Na 2 O)
 6 – 8
  Sodium Hydroxide (NaOH)
   9 – 11
  Carbonate as Sodium Carbonate (Na 2 CO 3 )
 12
  Carbon Dioxide (CO 2 ) by the Evolution Method
 13 – 16
 Soda Ash:
  Sampling
 17
  Matter Volatile at 150 °C to 155 °C
 18 and 19
  Total Alkalinity as Sodium Carbonate (Na 2 CO 3 )
 20 – 22
  Sodium Bicarbonate (NaHCO 3 )
 23 – 25
  Sodium Bicarbonate (NaHCO 3 ) by Potentiometric Titration
 26 – 28
  Matter Insoluble in Water
 29 and 30
  Apparent Density
 31 and 32
 Modified Soda (Sequicarbonate Type):
  Sampling
 33
  Total Alkalinity as Sodium Oxide (Na 2 O)
 34 – 36
  Sodium Bicarbonate (NaHCO 3 ) and Sodium Carbonate (Na 2 CO 3 )
 37 – 39
  Matter Insoluble in Water
 40
 Sodium Bicarbonate:
  Sampling
 41
  Sodium Bicarbonate, Sodium Carbonate, and Free Moisture
 42 – 45
  Matter Insoluble in Water
 46
 Sodium Metasilicate, Sodium Sesquisilicate and Sodium Orthosil-   icate:
  Sampling
 47
  Total Alkalinity as Sodium Oxide (Na 2 O)
 48 – 50
  Total Silica as SiO 2
 51 – 53
  Sodium Metasilicate (Na 2 SiO 3 ·5H 2 O)
 54
  Sodium Sesquisilicate (3Na 2 O·2SiO 2 ·11H 2 O)
 55
  Matter Insoluble in Water
 56 and 57
  Loss on Ignition of Sodium Sesquisilicate (3Na 2 O·2SiO 2 ·11H 2 O)
 58 and 59
  Sodium Orthosilicate (Na 4 SiO 4 )
 60
 Trisodium Phosphate:
  Sampling
 61
  Trisodium Phosphate (Na 3 PO 4 ) Content and Phosphorus   Pentoxide (P 2 O 5 )
 62 – 64
  Trisodium Phosphate Calculated as Na 3 PO 4 ·12H 2 O, Na 3 PO 4 ·   H 2 O, Na 3 PO 4 , and as P 2 O 5
 65 – 68
  Total Alkalinity as Sodium Oxide (Na 2 O)
 69 – 71
  Matter Insoluble in Water
 72 and 73
 Tetrasodium Pyrophosphate:
  Sampling
 74
  Tetrasodium Pyrophosphate   (Na 4 P 2 O 7 )
 75 – 79
  Matter Insoluble in Water
 80 and 81
  Loss on Ignition
 82 and 83
 Borax:
  Sampling
 84
  Total Borate and Excess Alkalinity or Acidity
 85 – 87
  Matter Insoluble in Water
 88 and 89
 Sodium Triphosphate:
  Sampling
 90
  Tritratable Na 2 O
 91 – 94
  Total P 2 O 5 :
   Preferred Method
 95 – 97
   Alternative Method
   98 – 101
   pH Titration
 102 – 107
  Quantitative Separation and Measurement of Various Phosphates:
   Reverse-Flow Ion-Exchange Chromatography (Preferred    Method)
 108 – 119
   Paper Chromatographic Method
 120 – 127
  pH of 1 percent Solution
 128
  Turbidity
 129
  Temperature Rise
 130 – 134
  Sulfate
 135 – 137
  Ignition Loss
 140 and 141
  Matter Insoluble in Water
 142 – 144
  Particle Size
 145
  Orthophosphate
 146 – 151
 1.3  The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
 1.4   This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Material Safety Data Sheets are available for reagents and materials. Review them for hazards prior to usage.
 1.5   This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ASTM D501-03(2023) PDF

ASTM D501-03(2023) PDF

$52.00 $104.00