ASTM D885/D885M-25 PDF

ASTM D885/D885M-25 PDF

Standard Test Methods for Tire Cords, Tire Cord Fabrics, and Industrial Filament Yarns Made from Manufactured Organic-Base Fibers

$52.00 $104.00 -50%
Product Code: ASTM D885/D885M
Stock In Stock
Published: 2025
Number of Pages: 31

Available Options

Product Description

Significance and Use
 5.1  The procedures in these test methods should be used with caution for acceptance of commercial shipments owing to the absence of factual information on the between-laboratory precision of many of the test procedures included in these test methods. It is recommended that any program of acceptance testing be preceded by an interlaboratory check in the laboratory of the purchaser and the laboratory of the supplier on replicate specimens of the materials to be tested for each property (or properties) to be evaluated.
 5.1.1  If there are differences of practical significance between reported test results for two laboratories (or more), comparative tests should be performed to determine if there is a statistical bias between them, using competent statistical assistance. As a minimum, test samples should be used that are as homogeneous as possible, that are drawn from the material from which the disparate test results were obtained, and that are randomly assigned in equal numbers to each laboratory for testing. Other materials with established test values may be used for this purpose. The test results from the two laboratories should be compared using a statistical test for unpaired data, at a probability level chosen prior to the testing series. If a bias is found, either its cause must be found and corrected, or future test results must be adjusted in consideration of the known bias.
 5.2  The significance and use of particular properties are discussed in the appropriate sections of specific test methods.
 Scope
 1.1  This standard covers the testing of industrial yarns wholly made of manufactured organic-based fibers; twisted cords made of these yarns; fabrics woven from these twisted cords; and other structures made specifically for use in manufacture of pneumatic tires.
 1.1.1  These test methods can also be applicable when these yarn structures are used for reinforcing other rubber goods and fabrics made with these cords.
 1.1.2  The test methods are relevant for evaluating various yarns: nylon, polyester, and rayon yarns; tire cords twisted from these yarns, and fabrics made from these yarns.
 1.2  The sections on “Growth of Conditioned Yarns and Cords,” “Properties of Yarns and Cords at Elevated Temperature,” and “Properties of Wet Yarns and Cords” have been moved to Appendix X1 – Appendix X3 as non-mandatory informational items because of their very limited use by the industry and because precision and bias statements are not included.
 1.3  This standard includes the following sections:
 Section
 Adhesion of Cord to Elastomers
 34
 Bibliography of Tire Cord Test Methods
 Appendix X5
 Breaking Strength (Force) of Yarns and Cords
  at Elevated Temperature
 X2.3
 Breaking Force of Conditioned Yarns and Cords
 16
 Breaking Force of Oven-Dried Rayon Yarns and Cords
 23
 Breaking Strength of Rayon Yarns and Cords at Specified  Moisture Regain Level, Adjustment of
 17
 Breaking Tenacity of Conditioned Yarns and Cords
 18
 Breaking Tenacity of Oven-Dried Rayon Yarns and Cords
 24
 Breaking Toughness of Yarns and Cords
 28
 Commercial Mass
 9
 Conditioning
 7
 Contraction of Wet Yarns and Cords
 Appendix X3
 Count of Tire Cord Fabric
 37
 Dip (Adhesive) Solids Pickup on Yarns and Cords
 33
 Elongation at Break of Conditioned Yarns and Cords
 19
 Elongation at Break of Oven-Dried Rayon Yarns and Cords
 25
 Elongation of Rayon Yarns and Cords at a  Specified Moisture Regain Level, Adjustment of Observed
 20
 Extractable Matter in Yarns and Cords
 32
 Force at Specified Elongation (FASE) of Conditioned Yarns and  Cords
 21
 Force-at-Specified-Elongation (FASE) of  Oven-Dried Rayon Yarns and Cords
 26
 Growth of Conditioned Yarns and Cords
 Appendix X1
 Identification of Fibers
 8
 Keywords
 40
 Linear Density
 11
 Mass of per Unit Area of Tire Cord Fabric
 36
 Modulus of Conditioned Yarns and Cords
 22
 Moisture Regain, Actual
 10
 Precision and Bias of Certain Yarn and Cord Tests
 39
 Properties of Tire Cord Fabric
 35 to 38
 Sampling
 6
 Shrinkage Force of Conditioned Yarns and Cords  at Elevated Temperature
 X2.5
 Shrinkage of Conditioned Yarns and Cords at Elevated Temperature
 X2.4
 Significance and Use, General
 5
 Significance and Use, Tensile Properties
 14
 SI Calculations (examples for work-to-break,  specific work-to-break, and breaking toughness)
 Appendix X4
 Stiffness of Fabric
 38
 Tensile Properties of Yarns and Cords
 12 to 28
 Terminology
 3
 Thickness of Cords
 31
 Twist in Yarns and Cords
 30
 Width of Tire Cord Fabric
 35
 Work-to-Break of Yarns and Cords
 27
 1.4  The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
 1.5   This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
 1.6   This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ASTM D885/D885M-25 PDF

ASTM D885/D885M-25 PDF

$52.00 $104.00