ASTM E354-25 PDF

ASTM E354-25 PDF

Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys

$52.00 $104.00 -50%
Product Code: ASTM E354
Stock In Stock
Published: 2025
Number of Pages: 36

Available Options

Product Description

Significance and Use
 4.1  These test methods for the chemical analysis of metals and alloys are primarily intended as referee methods to test such materials for compliance with compositional specifications, particularly those under the jurisdiction of the ASTM Committee A01 on Steel, Stainless Steel and Related Alloys. It is assumed that all who use these test methods will be trained analysts capable of performing common laboratory procedures skillfully and safely. It is expected that work will be performed in a properly equipped laboratory under appropriate quality control practices such as those described in Guide E882 .
 Scope
 1.1  These test methods cover the chemical analysis of high-temperature, electrical, magnetic, and other similar iron, nickel, and cobalt alloys having chemical compositions within the following limits:
   Element
 Composition Range, %
 Aluminum
 0.005
 to
 18.00
 Beryllium
 0.001
 to
  0.05
 Boron
 0.001
 to
  1.00
 Calcium
 0.002
 to
   0.05
 Carbon
 0.001
 to
  1.10
 Chromium
 0.10 
 to
 33.00
 Cobalt
 0.10 
 to
 75.00
 Columbium (Niobium)
 0.01 
 to
  6.0
 Copper
 0.01 
 to
 10.00
 Iron
 0.01 
 to
 85.00
 Magnesium
 0.001
 to
  0.05
 Manganese
 0.01 
 to
  3.0
 Molybdenum
 0.01 
 to
 30.0
 Nickel
 0.10 
 to
 84.0
 Nitrogen
 0.001
 to
  0.20
 Phosphorus
 0.002
 to
  0.08
 Silicon
 0.01 
 to
  5.00
 Sulfur
 0.002
 to
  0.10
 Tantalum
 0.005
 to
 10.0
 Titanium
 0.01 
 to
  5.00
 Tungsten
 0.01 
 to
 18.00
 Vanadium
 0.01 
 to
  3.25
 Zirconium
 0.01 
 to
  2.50
 1.2  The test methods in this standard are contained in the sections indicated below:
 Sections
 Aluminum, Total, by the 8-Quinolinol Gravimetric Method (0.20 %
    to 7.00 %)
 100  –  107
 Carbon, Total, by the Combustion-Thermal Conductivity Method— Discontinued 1986
 124 – 134
 Carbon, Total, by the Combustion Gravimetric Method (0.05 % to  1.10 %)— Discontinued 2014
 79 – 89
 Chromium by the Atomic Absorption Spectrometry Method
    (0.006 % to 1.00 %)
 165  –  174
 Chromium by the Peroxydisulfate Oxidation—Titration Method  (0.10 % to 33.00 %)
   175  –  183
 Chromium by the Peroxydisulfate-Oxidation Titrimetric Method—     Discontinued 1980
 116 – 123
 Cobalt by the Ion-Exchange-Potentiometric Titration Method (2 %    to 75 %)
   53  –  60
 Cobalt by the Nitroso-R-Salt Spectrophotometric Method (0.10 %     to 5.0 %)
   61  –  70
 Copper by Neocuproine Spectrophotometric Method (0.01 % to    10.00 %)
   90  –  99
 Copper by the Sulfide Precipitation-Electrodeposition Gravimetric  Method (0.01 % to 10.00 %)
   71  –  78
 Iron by the Silver Reduction Titrimetric Method (1.0 % to 50.0 %)
 192  – 199
 Manganese by the Metaperiodate Spectrophotometric Method
    (0.05 % to 2.00 %)
   9  –  18
 Molybdenum by the Ion Exchange—8-Hydroxyquinoline Gravi-  metric Method (1.5 % to 30 %)
 184  –  191
 Molybdenum by the Thiocyanate Spectrophotometric Method
    (0.01 % to 1.50 %)
 153  –  164
 Nickel by the Dimethylglyoxime Gravimetric Method (0.1 % to  84.0 %)
 135  –  142
 Phosphorus by the Molybdenum Blue Spectrophotometric Method    (0.002 % to 0.08 %)
 19   –  30
 Silicon by the Gravimetric Method (0.05 % to 5.00 %)
 46   –  52
 Sulfur by the Gravimetric Method— Discontinued    1988
 Former 30  – 36
 Sulfur by the Combustion-Iodate Titration Method (0.005 % to  0.1 %)— Discontinued 2014
 37  – 45
 Sulfur by the Chromatographic Gravimetric Method— Discontinued    1980
 108 – 115
 Tin by the Solvent Extraction–Atomic Absorption Spectrometry    Method (0.002 % to 0.10 %)
 143   –  152
 1.3  Methods for the determination of carbon and sulfur not included in this standard can be found in Test Methods E1019 .
 1.4  Some of the composition ranges given in 1.1 are too broad to be covered by a single method and therefore this standard contains multiple methods for some elements. The user must select the proper method by matching the information given in the Scope and Interference sections of each method with the composition of the alloy to be analyzed.
 1.5   Units— The values stated in SI units are to be regarded as standard.
 1.6   This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific hazards statements are given in Section 6 and in special “Warning” paragraphs throughout these test methods.
 1.7   This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ASTM E354-25 PDF

ASTM E354-25 PDF

$52.00 $104.00