ASTM F1166-23 PDF

ASTM F1166-23 PDF

Standard Practice for Human Engineering Design for Marine Systems, Equipment, and Facilities

$73.00 $146.00 -50%
Product Code: ASTM F1166
Stock In Stock
Published: 2023
Number of Pages: 236

Available Options

Product Description

Significance and Use
 4.1  The objective of this practice is to provide ergonomic design criteria for maritime vessels and structures to ensure that maritime systems and equipment are designed in compliance with requirements for human performance, human workload, health and safety, survivability, and habitability.
 4.2   Principles of Human Behavior:  
 4.2.1  There are basic principles of human behavior that control or influence how each person performs in their workplace. Some of these behaviors are culturally derived, while others are general and uniform across all cultures and geographical regions of the world. These behaviors influence a person’s physical, social, and psychological approach toward the work they do and how safely they do that work. Failure to satisfy these behavioral principles in the design of a ship or maritime structure can encourage, or even coerce, maritime personnel into taking unsafe risks in their everyday activities. It is, therefore, imperative that designers of ships and maritime equipment, systems, and facilities know these principles to provide a safe and efficient workplace for maritime personnel.
 4.2.2  These principles include:
 4.2.2.1  If the design of the ship or maritime facility is considered to be unsafe or inefficient by the crew, it will be modified by the users, often solving the initial problem but introducing others that may be as bad, or worse, than the original.
 4.2.2.2  Equipment design shall be such that it encourages safe use, that is, does not provide hardware and software that can be used in an unsafe manner.
 4.2.2.3  If the equipment or system is not designed to operate as the users’ cultural and stereotypical expectations lead them to think that it will operate, the chance for human error is significantly increased.
 4.2.2.4  If equipment or systems are perceived by operators/maintainers to be too complex or require more effort to operate or maintain than they believe is necessary, they will always look for a “shortcut.” Further, this “shortcut” may be perceived as being safe when it is not.
 4.2.2.5  No amount of training, company or organizational policy, threats of retaliatory action, warning notes in a technical manual or training guide, or pleading with personnel to be safe on the job can overcome poor design that encourages, leads, or even coerces personnel into unsafe acts on the job. The most efficient way to prevent unsafe design from contributing to an accident is to eliminate the unsafe design.
 4.2.2.6  Equipment users may not recognize latent hazards in a design. Therefore designers shall identify unsafe features that may not be recognized by users to minimize, or eliminate unsafe tasks, operations and acts. In addition, if hazards exist, the designer should clearly communicate known hazards inherent in processes and procedures to the users.
 4.2.2.7  Designers shall consider the possibility for human error and design equipment so that incorrect use (deliberate or accidental) will result in little or no harm to the user.
 4.2.2.8  Equipment operators and maintainers will be forced to infer as to what a label, instruction, or operational chart states if it is not complete, legible, readable, and positioned correctly.
 4.2.2.9  Designers and engineers shall never use themselves as the standard against which a particular design is evaluated. People come in many shapes, sizes, mental capacities, and capabilities. Therefore, design for the full range of potential users, physically, mentally, and socially.
 4.2.2.10  People shall be protected against themselves. Designers cannot create an unsafe piece of equipment or system and expect the users to assume full responsibility for its safe use.
 4.2.2.11  Ease of equipment maintenance affects the equipment’s reliability, that is, the harder it is to be maintained, the less it will be maintained.
 4.2.2.12  Equipment designed to require multiple operators working together simultaneously increases the likelihood of operator errors.
 4.2.2.13  Operational/maintenance procedures shall be clear, definitive, and comprehensive, otherwise, they will be misinterpreted or ignored.
 4.2.2.14  Structural items such as piping, cable trays, or any other item that appears strong enough to be used by a person to hold onto or stand on, and is placed in a convenient location to use for that purpose, will eventually be used for that purpose.
 4.2.2.15  Users expect consistency in the design and arrangement of their workplace. Therefore, if that workplace, or any part thereof, appears in more than one place in their work environment, it is expected to be located and look the same way at every location.
 4.2.2.16  When controls and displays associated with particular pieces of equipment are placed on a console or control panel, they shall be located on that console or panel to replicate the actual location of the equipment on the ship or structure as both are viewed by the operator. Therefore, equipment that is to the operator’s left as he or she faces the control station shall appear on the left of the control panel or console, and equipment to the right shall appear on the right side of the console or panel. This “spatial relationship” between the real world and the controls and displays that are associated with the equipment and systems of that world is extremely important in the design of ships and maritime structures.
 4.2.3  Users develop behavioral patterns based on their cultural experiences. Designing a ship or structure that ignores or violate those culturally derived behavior patterns will inevitably increase risks of user error.
 4.3   Conflicts— Where conflicts exist between the design criteria contained in this practice and other sources of ergonomic design criteria, this practice should prevail except where the conflicting criteria were produced by a regulatory authority
 4.4   Coverage— The design of vessels, structures, systems, subsystems, and equipment shall use the design criteria contained herein to provide the following:
 4.4.1  Safe atmospheric conditions including temperature and humidity;
 4.4.2  Limits on acoustic noise and vibration that will prevent performance degradation and physiological damage;
 4.4.3  Space for personnel, their equipment, and free volume for the movements and activities they are required to perform for operational and maintenance tasks under both normal and emergency conditions;
 4.4.4  Physical, visual, auditory, and other communication links between individual personnel and between personnel and their equipment under both normal and emergency conditions;
 4.4.5  Efficient arrangement of operation and maintenance workplaces, equipment, structural elements, controls, and displays;
 4.4.6  Natural or artificial illumination at levels suitable to perform all operational and maintenance tasks under both normal and emergency conditions;
 4.4.7  Safe passageways, hatches, stairs, ladders, walkways, platforms, ramps, and other provisions for ingress, egress, and passage under both normal and emergency conditions;
 4.4.8  Provision for protective equipment and clothing, systems, equipment, vessels, and structures that are designed to be operated and maintained by personnel wearing the equipment and clothing;
 4.4.9  Compatibility of control/display interfaces with human information processing capability;
 4.4.10  Immediate, accurate, and pertinent feedback to the operator of equipment or system performance after each control movement or action taken by the operator;
 4.4.11  Designs that satisfy human behavioral needs such as spatial relationships, consistency, homeostasis, and cultural and equipment expectations;
 4.4.12  Provision for labels, hazard signage, instructions, and procedures that are clear, concise, and understandable;
 4.4.13  Provision for fail-safe designs in those areas in which failure can disable a vital system or cause catastrophic damage to equipment, injury to personnel, or loss of mission capability;
 4.4.14  Designs that minimize potential human error incidence in the operation and maintenance of the system, particularly under conditions of stress and designs that ensure that errors, having been committed, can be corrected in time (the design is error tolerant);
 4.4.15  Designs that minimize training time and costs and encourage simplicity so as to reduce personnel special skills or innate abilities required to operate or maintain them;
 4.4.16  Designs that minimize the adverse impact of ship motion on human performance and health and safety; and
 4.4.17  Designs that provide for safe and efficient operation and maintenance by user populations from all geographical regions of the maritime world.
 4.5   Standardization— Controls, displays, markings, coding, labeling, and arrangement schemes for equipment and panel layouts shall be uniform for those items or designs that appear more than once on the vessel or structure. Human-machine interfaces shall exhibit common design approaches based on conventions and conformance to operator and maintainer expectations.
 4.6   Off-the-Shelf Equipment— One criterion for selecting off-the-shelf commercial or government-furnished equipment should be the degree to which the equipment conforms to the design criteria of this practice. Where off-the-shelf equipment requires modification to interface with other equipment, the modification should be designed to comply with this practice.
 4.7   Minimize Personnel— The design objective of the vessel or structure, equipment, systems, and subsystems shall be to reduce the number of personnel involved, especially simultaneously, in completing a particular task. Another design objective shall be to optimize ship or system manning, defined as the minimum number of personnel consistent with human performance, workload and safety requirements, reliability, affordability, and risk constraints.
 4.8   Completeness— It is realized that no design guide or practice can cover every design requirement that might occur through the course of a ship or maritime structure’s evolution. It is recognized that there will be occurrences in which a particular design requirement may have to be interpreted from the data that do exist. There may also be occasions in which design criteria may have to be acquired from a source other than this practice. When those occurrences arise, it is important that assistance be provided by trained human factors engineering (HFE) professionals familiar with this, and other, maritime-oriented design guidelines and standards and experienced in the application of these guidelines to the design of ships and maritime structures.
 FIG. 1  Control Movement Expectations
 Scope
 1.1  This practice provides ergonomic design criteria from a human-machine perspective for the design and construction of maritime vessels and structures and for equipment, systems, and subsystems contained therein, including vendor-purchased hardware and software.
 1.1.1  The focus of these design criteria is on the design and evaluation of human-machine interfaces, including the interfaces between humans on the one side and controls and displays, physical environments, structures, consoles, panels and workstations, layout and arrangement of ship spaces, maintenance workplaces, labels and signage, alarms, computer screens, material handling, valves, and other specific equipment on the other.
 1.2  The criteria contained within this practice shall be applied to the design and construction of all hardware and software within a ship or maritime structure that the human crew members come in contact in any manner for operation, habitability, and maintenance purposes.
 1.3  Unless otherwise stated in specific provisions of a ship or maritime structure design contract or specification, this practice is to be used to design maritime vessels, structures, equipment, systems, and subsystems to fit the full potential user population range of 5th % females to 95th % males.
 1.4  This practice is divided into the following sections and subsections:
 TABLE OF CONTENTS
 Section and Subsections
 Title
 1
 Scope
 2
 Referenced Documents
 3
 Terminology
 4
 Significance and Use
 5
 Controls
 5.1
 Principles of Control Design
 5.2
 General Design Guidelines
 5.3
 Control Movement
 5.4
 Control Spacing
 5.5
 Coding of Controls
 5.6
 Control Use and Design
 6
 Displays
 6.1
 Visual Displays
 6.2
 Location, Orientation, Lighting, and Arrangement of Displays
 6.3
 Display Illumination
 6.4
 Display Types
 6.5
 Audible Displays
 7
 Alarms
 7.1
 General Alarm Requirements
 7.2
 Visual Alarms
 7.3
 Audible Alarms
 7.4
 Voice Messages
 7.5
 Alarm Initiation Stations
 7.6
 Alarm Requirements by IMO
 8
 Integration of Controls, Displays, and Alarms
 8.1
 Principles of Design
 8.2
 Grouping Relationships—Principles of Arrangement
 8.3
 Separating Groupings
 8.4
 Position Relationships of Displays and Alarms
 8.5
 Position Relationships of Controls to Associated Displays and Alarms
 8.6
 Control and Display Movement Relationships
 8.7
 Spatial Relationship Between Controls, Displays, and Equipment
 8.8
 Alternative Approach to Grouping Design
 8.9
 Special Requirements for Control and Display Integration on Bridges
 9
 Anthropometry
 9.1
 General Design Requirements
 9.2
 Static Anthropometric Data
 10
 Workplace Arrangements
 10.1
 Basic Principles of Workplace Design
 10.2
 Seated Workstation
 10.3
 Standing Workstation
 10.4
 Kneeling Workstation
 10.5
 Squatting Workstation
 10.6
 Shelving
 10.7
 Status Boards and File Cabinets
 10.8
 Work Benches
 10.9
 Vertical Strainers and Filters
 10.10
 Reach Limitations at Workstations
 10.11
 Safety Eyewash Fountains and Showers
 10.12
 Pedestal-Mounted Controls and Displays
 10.13
 Hand Cranks and Pumps
 10.14
 Bulkhead-Mounted Equipment
 10.15
 Equipment Racks, Cabinets, and Individual Equipment Spacing
 10.16
 Consoles and Control Panels
 10.17
 Bridge Design
 11
 Access Aids: Stairs, Handrails, Railings, Vertical Ladders, Ramps, Doors, Lightening Holes, Hatches, Kick-Out Panels, Passageways and Walkways, and Work Platforms)
 11.1
 Stairs, Ladders, and Ramps
 11.2
 Stairs
 11.3
 Ramps
 11.4
 Vertical Ladders
 11.5
 Vertical Ladders with Safety Cages
 11.6
 Vertical Ladders with Positive Fall Protection Devices
 11.7
 Special Ladder Requirements
 11.8
 Handle/Hand Grab
 11.9
 Individual Rung Ladders
 11.10
 D-Ring Ladders
 11.11
 Handrails
 11.12
 Walkways, Passageways, and Alternate Means of Personnel Movement
 11.13
 Elevated Work Platforms
 11.14
 Hatches, Manways, Lightening Holes, Inspection Ports, and Kick-Out Panels
 11.15
 Doors and Arches
 11.16
 Permanent Means of Access (PMA)
 12
 Valve Placement, Orientation, and Location
 12.1
 General Design Requirements
 12.2
 Valve Criticality and Location
 12.3
 Valve-Mounting Heights and Orientations: Handwheel Operated
 12.4
 Valve-Mounting Heights and Orientations: Lever-Operated Valves
 12.5
 Alternative Valve Orientations
 12.6
 Valve Manifolds
 13
 Human-Computer Interface
 13.1
 General Design Requirements
 13.2
 System Operations
 13.3
 Computer Displays
 13.4
 Display Content
 13.5
 Display Coding
 13.6
 Dynamic Displays
 13.7
 Display Format
 13.8
 Textual Data Displays
 13.9
 Graphic Displays
 13.10
 Audio Displays
 13.11
 Data Entry
 13.12
 Interactive Control
 13.13
 Graphic Controls
 13.14
 Windows
 13.15
 Menus
 13.16
 Forms
 13.17
 Alarms
 13.18
 Language
 13.19
 Feedback
 13.20
 Prompts
 13.21
 Defaults
 13.22
 Error Management/Data Protection
 13.23
 Data Security
 13.24
 Help
 13.25
 Software
 13.26
 Data Transmission/Messaging
 13.27
 Input Devices
 13.28
 Cursors
 13.29
 Printing
 14
 Habitability
 14.1
 Noise
 14.2
 Indoor Climate
 14.3
 Lighting
 14.4
 Whole-body Vibration and Shock
 15
 Labeling
 15.1
 Design Criteria of Labels
 15.2
 Abbreviations
 15.3
 Symbols
 15.4
 Component Labels on Consoles and Panels
 15.5
 Equipment Identification Labels
 15.6
 Electrical System Labels
 15.7
 Room, Deck Space, and Void Identification Labels
 15.8
 Pipe Marker Labels
 15.9
 Safe Working Load Identification Labels
 15.10
 Load Weight Identification Labels
 15.11
 Hazard Identification Signs
 15.12
 Information Signs
 15.13
 Instruction Labels
 15.14
 Graphical Schematics or Diagrams
 15.15
 Orientation Plans
 15.16
 Emergency Instructions
 16
 Material Handling
 16.1
 Design to Support Manual Material Lifting and Carrying
 16.2
 Weight Lifting
 16.3
 Weight Carrying
 16.4
 Design of Handles and Grasp Areas
 16.5
 Design of Auxiliary Hoisting and Carrying Devices
 16.6
 Hand Trucks and Wheeled Dollies
 16.7
 Crane Design
 17
 Design for Maintenance
 17.1
 General Design Requirements
 17.2
 Maintenance Accessibility
 17.3
 Maintenance Environments
 17.4
 Lubrication
 17.5
 Cases
 17.6
 Covers
 17.7
 Fasteners
 17.8
 Hatches, Manways, Lightening Holes for Maintenance Access
 17.9
 Diagnostics and Troubleshooting
 17.10
 Equipment Modularization
 17.11
 Equipment Mounting and Installation
 17.12
 Standardization
 17.13
 Electrical Wires and Cables
 17.14
 Conductors
 17.15
 Connectors
 17.16
 Test Equipment
 17.17
 Fuses and Circuit Breakers
 17.18
 Hydraulic Systems
 17.19
 Stored Energy Devices
 17.20
 Pipe Flanges, Spools, and Blinds
 17.21
 Test and Sample Points
 18
 Hazards and Safety
 18.1
 Hierarchy of Controls
 18.2
 Safety Labels, Signs, and Excluded Area Markings
 18.3
 General Workplace Hazards
 18.4
 General Equipment-Related Hazards
 18.5
 Electrical Hazards
 18.6
 Mechanical Hazards
 18.7
 Fluid Hazards
 18.8
 Safety Barriers
 18.9
 Fall Protection
 18.10
 Emergency Egress
 19
 Communications
 19.1
 Communication System Requirements
 19.2
 Microphones
 19.3
 Headsets
 19.4
 Loudspeakers
 19.5
 Telephone Systems
 20
 Keywords
 21
 Acknowledgement
 Appendix X1
 Small Boat and High Speed Craft (HSC) Appendix
 Appendix X2
 Human Factors Engineering (HFE) Design Checklist
 Appendix X3
 Guidance for the Selection and Testing of Slip Resistant Walking Surfaces
 LIST OF FIGURES
 Figure
 Title
 1
 Control Movement Expectations
 2
 Foot-Operated Switches Design Requirements
 3
 Pedal Location and Design Requirements
 4
 Lateral Spacing for Pedals
 5
 Design Criteria for Discrete Rotary Controls
 6
 Separation Requirements for Discrete Rotary Controls
 7
 Dimension, Resistance, and Separation of Continuous Rotary Controls
 8
 Proper Mounting of Rapidly Operated Cranks
 9
 Dimensions, Resistance, and Separations Required for Cranks
 10
 Design Criteria for Pushbuttons
 11
 Two Types of Legend Switches (Backlit Pushbuttons)
 12
 Size, Displacement, and Resistance for Legend Switches
 13
 Design Requirements for Various Types of Toggle Switches
 14
 Design Requirements for Rocker Switches
 15
 Dimensions, Resistance, and Separation for Discrete Slide Switch Controls
 16
 Dimensions, Resistance, and Separation for Continuous Slide Controls
 17
 Dimensions, Resistance, and Separation for Levers
 18
 Dimensions, Resistance, and Separation for Slide Levers
 19
 Dimensions, Displacement, and Separation of Push-Pull Controls
 20
 Visual Lines of Sight
 21
 Primary and Secondary Fields-of-view
 22
 Design Criteria for Major, Intermediate, and Minor Scale Markings
 23
 Scale Graduation, Pointer Position, and Scale Numbering Alternatives
 24
 Scale Number Placement
 25
 Color and Shape Coding of Ranges on an Analog Display
 26
 Zero Position and Pointer Movement for Circular Dial Displays
 27
 Aligned Pointers for Rapid Check Readings
 28
 Digital Display Design Requirements
 29
 Grouping Controls and Displays by Common Function
 30
 Grouping Controls and Displays by Individual Equipment
 31
 Mirror-Imaged Arrangement of Individual Equipment Control and Display Groupings (Not Recommended)
 32
 Grouping Controls and Displays by Common Equipment
 33
 Grouping Controls and Displays by Sequence of Use
 34
 Grouping with Physical Separation
 35
 Grouping with Boundary Lines and Borders
 36
 Grouping with Colored and Shaded Pads
 37
 Grouping with Sub-panels
 38
 Position of Individual Controls and Associated Displays for Right-handed Operator
 39
 Arrangement of Multiple Rows of Controls and Displays
 40
 Arrangement of Multiple Rows of Displays and a Single Row of Controls
 41
 Positional Relationship between Alarm, Display, and Control
 42
 Positional Relationship between Control Pointer and Status Indicator
 43
 Control and Display Movement Relationship
 44
 Spatial Relationship Between Controls, Displays, and Equipment
 45
 Spatial Relationships Between Equipment and Control Panels
 46
 Spatial Relationships for Redundant Controls and Displays
 47
 Panel Layout That Replicates Location of Equipment in Remote Space
 48
 Mimic of Physical Equipment Functional Layout
 49
 Mimic of Functional Groups Irrespective of Equipment Layout
 50
 Standing Body Dimensions
 51
 Seated Body Dimensions
 52
 Depth and Breadth Dimensions
 53
 Hand and Foot Dimensions
 54
 Gloved Hand Dimensions
 55
 Head Dimensions
 56
 Changes in Levels up to a Maximum of 6 mm ( 1 / 4  in.)
 57
 Seated Workspace Dimensions
 58
 Dimensions for a Computer Workstation
 59
 Dimensions for Single or Multiple Personnel at a Table or Other Duty Station Not Requiring a Desk
 60
 Seating at CRT-Type Workstations
 61
 Clearance Behind a Seated Workstation
 62
 Control Mounting Height for Seated Personnel
 63
 Display Mounting Height for Seated Personnel
 64
 Control Mounting Height for Standing Personnel
 65
 Display Mounting Height for Standing Personnel
 66
 Control Mounting Height for a Kneeling Person
 67
 Display Mounting Height for Kneeling Personnel
 68
 Required Dimensions for a Kneeling Worker
 69
 Control Mounting Height for Squatting Personnel
 70
 Display Mounting Heights for Squatting Personnel
 71
 Required Dimensions for a Squatting Worker
 72
 Workplace Dimensions for Shelves with Full Access
 73
 Workplace Dimensions for Shelves Located Above a Cabinet
 74
 Workplace Dimensions for Shelves Requiring Vision Over the Top
 75
 Front Clearance Requirement for Lower Shelves
 76
 Mounting Height of Status Boards
 77
 Clearance in Front of Filing Cabinets
 78
 Workbench Dimensions
 79
 Safe Reach Distances Over an Obstacle or Barrier
 80
 Mounting Heights for Bulkhead-mounted Equipment in Passageways
 81
 Mounting Heights for Common Electrical Fixtures
 82
 Direct Spatial Relationships Between Controls and Equipment
 83
 Spatial Relationship of Fore and Aft Equipment to Controls and Displays on a Console Located Athwartship
 84
 Seated Single-operator Console Dimensions
 85
 Wraparound Seated Console
 86
 Special Width Console
 87
 Multi-tiered Standing Console
 88
 Multi-tiered Seated Console
 89
 Dimensions for Desktop Standing Console
 90
 Cargo and Ballast Transfer Consoles
 91
 Stair Dimensions
 92
 Straight Run Ramp Dimensions
 93
 Ramp with Turning Platform
 94
 Ramp with Switchback Turning Platform
 95
 Vertical Ladder Dimensions
 96
 Dimensions for a Vertical Ladder Arrangement
 97
 Platform/Landing Dimensions for Vertical Ladder Penetration
 98
 Caged Ladder Dimensions
 99
 Cage Shape and Size
 100
 Ladder and Climber Safety Device Dimensions
 101
 Extended Railing for Ladder Fall Protection (Front View)
 102
 Extended Railing for Ladder Fall Protection (Side View)
 103
 Extended Railing and Cage for Ladder Fall Protection (Front View)
 104
 Extended Railing and Cage for Ladder Fall Protection (Side View)
 105
 Handles or Hand Grabs for Use as Ladder Extensions
 106
 Handle for Transition from a Ladder to an Intermediate Platform
 107
 Recommended Design Criteria for Individual Rung Ladders
 108
 Dimensions for D-Ring Ladders
 109
 Fixed Handrail Design
 110
 Removable Handrail Dimensions
 111
 Special Handrail Design Dimensions
 112
 Transition Handrail Dimensions
 113
 Additional Personnel Movement-related Design Features
 114
 Dimensions for Rectangular Access Openings Installed in a Vertical Orientation Requiring a Step to Reach the Opening
 115
 Dimensions for Rectangular, Square, and Round Hatches, Manways, and Lightening Holes
 116
 Dimensions for Lightening Holes
 117
 Access to Vertical Escape Hatches
 118
 Access to Overhead Hatch
 119
 Access into a Cargo Hold Through a Raised Hatch
 120
 Door Placement
 121
 Desirable Upper Limits for Handwheel Torque
 122
 Mounting Heights for Handwheel Valves With Vertical Stems
 123
 Mounting Heights for Handwheel Valves With Horizontal Stems
 124
 Mounting Heights for Handwheel Valves With Angled Stems
 125
 Mounting Heights for Lever-Operated Valves With Vertical Stems
 126
 Mounting Heights for Lever-Operated Valves With Horizontal Stems
 127
 Direction of Travel for Valve Levers Accessible From One Side Only
 128
 Physical Reach from a Stooping or Squatting Position
 129
 Mounting Position for Valve Levers and Handwheels Below Standing Surface
 130
 Orientation and Reach from Ladder Parallel to Valves
 131
 Orientation and Reach from Ladder Perpendicular to Valves
 132
 Operating Valves from a Ladder
 133
 Valve Manifold for Tanks Located Athwartship
 134
 Valve Manifold for Tanks Located Fore and Aft
 135
 Valve Manifold for Fill, High-suction, and Low-suction Valves
 136
 Default Push Button
 137
 Push Button States
 138
 Radio Buttons
 139
 Check Boxes
 140
 Slider Control
 141
 Message Window Design
 142
 Finger-Operated Displacement Joystick Specifications
 143
 Trackball Dimensions, Resistance, and Clearance
 144
 Permissible Noise Exposure Limits
 145
 Large Enclosure Ventilation Requirements
 146
 Surface Reflectance Values
 147
 Health Guidance Zones for Limited Exposures
 148
 Independent Symbols
 149
 Guidelines for Labels on Consoles and Panels
 150
 Control and Control Setting Labels
 151
 Control and Display Group Labels
 152
 Control Setting Labels for Multiple Controls
 153
 Equipment Label Format
 154
 Sensor Label
 155
 Pipe Marker Labels
 156
 Pipe Marker Labels with Two Colors
 157
 Hazard Signal Word Headers
 158
 Examples of Text and Symbol on Signs
 159
 Example of Information Sign
 160
 Handle Dimensions
 161
 Use of Hand Trucks
 162
 Use of Dollies
 163
 Case Orientation
 164
 Access Opening Covers
 165
 Example of Alignment Pins
 166
 Cable Arrangements
 167
 Suggested Cable Arrangement in a Junction Box
 168
 Fluid Line Connection Recommendations
 169
 Areas To Place Items on Bulkhead
 170
 Safety Barriers
 X1.1
 Primary and Secondary Fields of View
 LIST OF TABLES
 Table
 Title
 1
 Recommended Manual Controls
 2
 Control Movement Expectations
 3
 Minimum Spacing Between Two Controls
 4
 Comparison of Displacement and Isometric Controls
 5
 Typical Status Display and Alarm Color Codes for North American Industry
 6
 Character Sizes for Digital Displays
 7
 Functional Evaluation of Types of Audio Signals
 8
 Guidelines for Color Coding of Visual Alarms
 9
 General Recommendations for Sound Loudness and Frequency
 10
 Guidelines for Selecting Audible Alarm Sounds
 11
 Clothing and Postural Effects
 12
 International Geographical Regions for Which Anthropometric Data Are Available
 13
 Standing Height Dimensions—International Population
 14
 Seated Eye Height Dimensions—International Population
 15
 Forward Reach Dimensions—International Population
 16
 Male Anthropometric Data from Four Regions of the World
 17
 Female Anthropometric Data from Four Regions of the World
 18
 Weights for American Adult Females and Males
 19
 Seated Workspace Dimensions
 20
 Dimensions for a Seated Computer Workstation
 21
 Selection of Access Type
 22
 Stair Dimensions
 23
 Stair Widths
 24
 Handrail Arrangements
 25
 Recommended Ramp Angle Inclinations
 26
 Walkway and Passageway Dimensions
 27
 Dimensions for Additional Personnel Movement-related Features
 28
 Access Opening and Mounting Depth Dimensions for Levers and Handwheels Mounted Below the Standing Surface
 29
 System Response Time Limits
 30
 Advantages and Disadvantages of Nonkeyboard Input Devices
 31
 Keyboard Push-button Characteristics
 32
 Pointer Shapes and Associated Functions
 33
 Pointing Device Button Actions
 34
 Limiting Dimensions for Mouse
 35
 Maximum Permissible Noise Levels
 36
 Noise Attenuation from Hearing Protectors
 37
 Lighting Levels for Ships and Maritime Structures
 38
 Maximum Brightness Ratios
 39
 Operational Environment Types
 40
 Examples of Equipment Labels
 41
 Pipe Label Format
 42
 Example Color-Coding Scheme for Vessel/structure Piping
 43
 Chromaticity Coordinates for Color Coding
 44
 Message Text Character Heights
 45
 Design Weight Limits for Lifting
 46
 Design Weight Limits for Carrying
 47
 Limiting Factors
 48
 Seated, Forward Reach (Both Arms)
 49
 Cross-Legged Seated, Forward Reach (Both Arms)
 50
 Standing, Forward Reach (Both Arms)
 51
 Standing, Forward Reach (Preferred Arm)
 52
 Standing, Lateral Reach (Preferred Arm)
 53
 Opening Dimensions for Single-hand Access with Tools
 54
 Opening Dimensions for Single-hand Access without Tools
 55
 Opening Dimensions for Arm Access without Tools
 56
 Opening Dimensions for Two-hand Access
 57
 Thermal Temperature Limits
 58
 Shock Current Intensities and Their Probable Consequences
 59
 Minimum Speech Intelligibility Scores
 X1.1
 Visibility Standards for HSC and Small Boat Application
 X1.2
 Forward Functional Reach Measurements for North American Population
 X2.1
 Human Factors Checklist for Design
 1.5   This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
 1.6   This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ASTM F1166-23 PDF

ASTM F1166-23 PDF

$73.00 $146.00