ASTM B171/B171M-24 PDF

ASTM B171/B171M-24 PDF

Standard Specification for Copper-Alloy Plate and Sheet for Pressure Vessels, Condensers, and Heat Exchangers

$36.00 $72.00 -50%
Product Code: ASTM B171/B171M
Stock In Stock
Published: 2024
Number of Pages: 7

Available Options

Product Description

This specification establishes the requirements for plates, sheets, and circles cut from plates and sheets made of UNS C36500, C44300, C44400, C44500, C46400, C46500, C61300, C61400, C63000, C63200, C70600, C70620, C71500, C71520, or C72200 copper alloy. These materials are recommended for use in pressure vessels, condensers, and heat exchangers. The materials are manufactured by either hot rolling or forging and finished by such cold working and annealing to produce products of the required dimensions and properties. Tempers available under this specification are as hot rolled and hot rolled and annealed. The products manufactured for ASME Boiler and Pressure Vessel code applications must be certified to the hot rolled and annealed temper while all other products can either have hot rolled or hot rolled and annealed temper. This specification also contains information on the required material chemical compositions, densities, and tensile properties.
 Scope
 1.1  This specification 2 covers the requirements for copper-alloy plate, sheet, and circles cut from plate and sheet for pressure vessels, condensers, and heat exchangers. The following alloys are covered:
 Copper Alloy
 Previously Used Designation
 C36500
 Leaded Muntz Metal
 C44300
 Admirality, Arsenical
 C44400
 Admirality, Antimonial
 C44500
 Admirality, Phosphorized
 C46400
 Naval Brass, Uninhibited
 C46500
 Naval Brass, Arsenical
 C61300
 Aluminum Bronze
 C61400
 Aluminum Bronze D
 C63000
 10 % Aluminum-Nickel Bronze
 C63200
 9 % Aluminum-Nickel Bronze
 C70600
 90-10 Copper Nickel
 C70620
 90-10 Copper Nickel-(modified for welding)
 C71500
 70-30 Copper Nickel
 C71520
 70-30 Copper Nickel-(modified for welding)
 C72200
 . . .
 1.2   Units— The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
 1.3   This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ASTM B171/B171M-24 PDF

ASTM B171/B171M-24 PDF

$36.00 $72.00