ASTM B283/B283M-24 PDF

ASTM B283/B283M-24 PDF

Standard Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed)

$40.00 $80.00 -50%
Product Code: ASTM B283/B283M
Stock In Stock
Published: 2024
Number of Pages: 15

Available Options

Product Description

This specification establishes the requirements for copper and copper die forgings produced by hot pressing method. The forgings included here are designated with the following Copper or Copper Alloy UNS Nos.: C11000 (copper), C14500 (copper-tellurium alloy), C14700 (copper-sulfur alloy), C36500 (leaded Muntz metal), C37000 (free-cutting Muntz metal), C37700 (forging brass), C46400 (naval brass), C48200 (medium leaded naval brass), C48500 (leaded naval brass), C61900 (aluminum bronze), C62300 (9% aluminum bronze), C63000 and C63200 (aluminum-nickel bronze), C64200 (aluminum-silicon bronze), C64210 (6.7% aluminum-silicon bronze), C65500 (high-silicon bronze), C67500 (manganese bronze), C67600, C69300 (copper-zinc-silicon alloy), C70620 (90% copper-10% nickel alloy), C71520 (70% copper-30% nickel alloy), and C77400 (45% nickel-10% silver alloy). The materials for manufacture shall be rods, billets, or blanks of such purity and soundness as to be suitable for processing by hot pressing. Products shall be tested to examine their conformance to mechanical (tensile and yield strengths, and elongation), dimensional, and chemical composition requirements.
 Scope
 1.1  This specification covers the requirements for copper and copper alloy die forgings produced by the hot pressing method. The following copper and copper alloys are included:
 Copper or Copper Alloy UNS No.
 Name
 C11000
     copper
 C14500
     copper-tellurium
 C14700
     copper-sulfur
 C27450
     plumbing brass
 C27451
     plumbing brass
 C27453
     copper zinc alloy
 C28500
     copper-zinc brass
 C35330
     leaded brass
 C36300
     copper-zinc-lead
 C36500
     leaded Muntz metal
 C37000
     free-cutting Muntz metal
 C37700
     forging brass
 C46400
     naval brass
 C46500
     naval brass, arsenical
 C46750
     tin brass
 C48200
     medium leaded naval brass
 C48500
     leaded naval brass
 C48600
     naval brass
 C48640
     DZR brass
 C48645
     DZR tin brass
 C49250
     copper-zinc-bismuth alloy
 C49255
     copper-zinc-bismuth-nickel alloy
 C49260
     copper-zinc-bismuth alloy
 C49265
     copper-zinc-tin-bismuth, low leaded
 C49300
     copper-zinc-tin-bismuth alloy
 C49340
     copper-zinc-tin-bismuth alloy
 C49345
     copper-zinc-tin-bismuth, low leaded
 C49350
     copper-zinc-tin-bismuth alloy
 C49355
     bismuth brass
 C61900
     aluminum bronze
 C62300
     aluminum bronze, 9 %
 C63000
     aluminum-nickel bronze
 C63200
     aluminum-nickel bronze
 C64200
     aluminum-silicon bronze
 C64210
     aluminum-silicon bronze, 6.7 %
 C65500
     high-silicon bronze (A)
 C65680
     high-silicon bronze
 C67500
     manganese bronze (A)
 C67600
     . . .
 C69300
     copper-zinc-silicon
 C69410
     copper-zinc-silicon
 Copper or Copper Alloy UNS No.
 Name
 C69850
     copper-zinc-silicon
 C70620
     copper-nickel 90-10
 C71520
     copper-nickel 70-30
 C77400
     nickel silver, 45-10
 C87700
     silicon bronze
 C87710
     silicon bronze
 Copper Alloy EN 1412 Nos.
 Name
 CW612N
     forging brass
 CW617N
     forging brass
 1.2   Units— The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other and values from the two systems shall not be combined.
 Note 1:   Nominal composition and relative forgeability ratings are given in Appendix X1 . Copper-nickel alloys C70620 and C71520 are intended for welded applications with seawater exposure.
 Note 2:   Guidelines for design and development of forgings are included in Appendix X2 .
 Note 3:   Wrought product intended for hot forging is described in Specification B124/B124M .
 1.3   The following safety caveat pertains only to Section 10 of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
 1.4   This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ASTM B283/B283M-24 PDF

ASTM B283/B283M-24 PDF

$40.00 $80.00