ASTM D4317-16(2023) PDF

ASTM D4317-16(2023) PDF

Standard Specification for Polyvinyl Acetate-Based Emulsion Adhesives

$36.00 $72.00 -50%
Product Code: ASTM D4317
Stock In Stock
Published: 2023
Number of Pages: 6

Available Options

Product Description

This specification covers polyvinyl acetate or polyvinyl acetate copolymer resin emulsion adhesives suitable for use on wood, wood-based substrates, or plastic laminates. This does not cover the group of polyvinyl-based adhesives suitable for bonding flexible films. Adhesives are classified on the basis of water resistance at three performance levels, namely wet-use (Type 1), intermediate use (Type 2), and dry-use (Type 3). Adhesives shall conform to test requirements as performed under the following exposure conditions and treatments: dry shear at specified temperatures; two-cycle boil; 48-hour soak; humidity exposure; freeze-thaw stability; and storage life. Materials shall also adhere to physical properties such as density, nonvolatile matter, and pH.
 Scope
 1.1  This specification covers polyvinyl acetate or polyvinyl acetate copolymer resin emulsion adhesives suitable for use on wood, wood-based substrates, or plastic laminates. It does not cover the group of polyvinyl-based adhesives which are suitable for bonding flexible films.
 1.2  The adhesives are classified at three performance levels in accordance with water-resistance as shown in Table 1 and Table 2 . See Section 5 for a description of the expected exposure conditions for each class of adhesive. See Table X1.1 for a classification of typical end products that are manufactured using adhesives at the three performance levels covered by this specification.
 1.3  The following index is provided as a guide to the test methods portion of this specification:
 Section
 Tests for Physical Properties
   9
 Viscosity
   9.1.1
 Density
   9.1.2
 Nonvolatiles
   9.1.3
 pH
   9.1.4
 Tests for Adhesive Bond
   10
 Block Shear Strength, Compression
   10.2
 Plywood Shear Tests
   10.3
 1.4  The values stated in SI units are to be regarded as the standard. The values given in parenthesis are for information purposes only.
 1.5   The following safety hazards caveat pertains only to the test method portion, Sections 9 and 10 , of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
 1.6   This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ASTM D4317-16(2023) PDF

ASTM D4317-16(2023) PDF

$36.00 $72.00