ASTM D4566-20 PDF

ASTM D4566-20 PDF

Standard Test Methods for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable

$52.00 $104.00 -50%
Product Code: ASTM D4566
Stock In Stock
Published: 2020
Number of Pages: 30

Available Options

Product Description

Significance and Use
 6.1  Electrical tests, properly interpreted, provide information with regard to the electrical properties of the insulation. The electrical test values give an indication as to how the insulation will perform under conditions similar to those observed in the tests. Electrical tests provide data for research and development, engineering design, quality control, and acceptance or rejection under specifications.
 Scope
 1.1  These test methods cover procedures for electrical testing of thermoplastic insulations and jackets used on telecommunications wire and cable and for the testing of electrical characteristics of completed products. To determine the procedure to be used on the particular insulation or jacket compound, or on the end product, reference should be made to the specification for the product.
 1.2  These test methods appear in the following sections of this standard:
 Test Method
 Sections
 Electrical Tests of Insulation—In-process
 5 – 9
 DC proof test
 9
 Insulation Defect or Fault Rate
 8
 Spark Test
 7
 Electrical Tests of Completed Wire and Cable
 10 – 52
 Attenuation
 25
 Attenuation, Effects Due to Aging
 32
 Attenuation, Effects Due to Elevated Temperature
 30
 Attenuation, Effects Due to Humidity
 31
 Attenuation to Crosstalk Ratio—Far End (ACR-F)
 29
 Attenuation to Crosstalk Ratio—Near End (ACR-N)
 27
 Capacitance Deviation
 20
 Capacitance Difference
 21
 Capacitance Unbalance, Pair-to-ground (CUPG)
 23
 Capacitance Unbalance, Pair-to-pair (CUPP)
 22
 Capacitance Unbalance, Pair-to-support Wire
 24
 Characteristic Impedance—Test Method 1: Propagation Constant and Capacitance
 48
 Characteristic Impedance—Test Method 2: Single-ended Measurements
 49
 Characteristic Impedance—Test Method 3: Least Squares Function Fit
 50
 Coaxial Capacitance (Capacitance to Water)
 18
 Conductor Continuity
 12
 Conductor Resistance (CR)
 14
 Conductor Resistance Unbalance (CRU of Pairs)
 16
 Continuity of Other Metallic Elements
 13
 Crosses Test (Continuity Between Wires of Different Pairs)
 36
 Crosstalk Loss, Far-end
 28
 Crosstalk Loss, Near-end
 26
 DC Proof Test, Core-to-internal Shield (Screen)
 41
 DC Proof Test, Core-to-shield
 39
 DC Proof Test, Core-to-support Wire
 40
 DC Proof Test, Internal Shield (Screen)-to-shield
 42
 DC Proof Test, Other Required Isolations
 43
 DC Proof Test, Wire-to-wire
 38
 Fault Rate Test (Air Core Only)
 34
 Insulation Resistance (IR)
 33
 Jacket Voltage Breakdown Rating Test
 37
 Mutual Capacitance (CM)
 19
 Mutual Conductance
 17
 Phase Constant
 45
 Phase Delay
 46
 Phase Velocity
 47
 Resistance of Other Metallic Cable Elements
 15
 Shorts Test (Continuity Between Wires of a Pair)
 35
 Structural Return Loss and Return Loss
 51
 Unbalance Attenuation (Conversion Losses)
 52
 Voltage Surge Test
 44
 1.3  The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
 1.4   This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific hazard statements are given in Sections 7 and 38 .
 1.5   This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ASTM D4566-20 PDF

ASTM D4566-20 PDF

$52.00 $104.00