ASTM D5047-17(2023) PDF

ASTM D5047-17(2023) PDF

Standard Specification for Polyethylene Terephthalate Film and Sheeting

$32.00 $64.00 -50%
Product Code: ASTM D5047
Stock In Stock
Published: 2023
Number of Pages: 3

Available Options

Product Description

This specification establishes the dimensional (length and width, thickness, and weight) requirements for biaxially oriented polyethylene terephthalate film and sheeting, both virgin and recycled. For this specification, polyethylene terephthalate film and sheeting shall be defined as the material derived from terephthalic acid and ethylene glycol and shall consist of at least 90 % polyethylene terephthalate homopolymer. The film or sheeting shall be furnished flat or in rolls in the dimensions specified. This specification does not apply to coated, coextruded, tinted, pigmented, or metallized film or sheeting.
 Scope
 1.1  This specification covers requirements for biaxially oriented polyethylene terephthalate film and sheeting in thicknesses from 1.5 μm (0.06 mil) to 355 μm (14.0 mil). For this specification, polyethylene terephthalate film and sheeting shall be defined as the material derived from terephthalic acid and ethylene glycol and shall consist of at least 90 % polyethylene terephthalate homopolymer. This specification does not apply to coated, coextruded, tinted, pigmented, or metallized film or sheeting.
 1.2  Polyethylene terephthalate materials, being thermoplastic, are reprocessable and recyclable. 2 This specification allows for the use of those polyethylene terephthalate plastic materials, provided that any specific requirements as governed by the producer and end user are met.
 1.3  The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only.
 Note 1:   There is no known ISO equivalent to this specification.
 Note 2:   Film is defined as sheeting having a thickness of ≤ 250 microns (0.010 in.).
 1.4   This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ASTM D5047-17(2023) PDF

ASTM D5047-17(2023) PDF

$32.00 $64.00