ASTM D8047-23 PDF

ASTM D8047-23 PDF

Standard Test Method for Evaluation of Engine Oil Aeration Resistance in a Caterpillar C13 Direct-Injected Turbocharged Automotive Diesel Engine

$56.50 $113.00 -50%
Product Code: ASTM D8047
Stock In Stock
Published: 2023
Number of Pages: 44

Available Options

Product Description

Significance and Use
 5.1   Background— Prior to this test method, the ability of an engine lubricant to resist aeration was measured by the engine oil aeration test (EOAT) described in Test Method D6894 . The continued availability of engine parts coupled with field service aeration problems led to concerns about the relevance of this test method to newer oil and engine technologies. These concerns prompted the development of this new engine oil aeration test method, based on the Caterpillar C13 engine and termed COAT. This test method aims to provide a more reliable measurement of the ability of a lubricant to resist aeration during engine operation in field service. The engine used is of current technology and the aeration measurement is operator independent.
 5.2   Test Method— This test method evaluates aeration performance under high-engine-speed, zero-load operation in a turbocharged, heavy-duty, four-stroke diesel engine.
 5.3   Use:  
 5.3.1  The tendency of engine oils to aerate in direct-injection, turbocharged diesel engines is influenced by a variety of factors, including engine oil formulation, oil temperature, sump design and capacity, residence time of the oil in the sump, and the design of the pressurized oil systems. In some engine oil-activated systems, the residence time of the oil in the sump is insufficient to allow dissipation of aeration from the oil. As a consequence, aerated oil can be circulated to hydraulically activated components, adversely affecting the engine timing characteristics and engine operation.
 5.3.2  The results from this test method may be compared against specification requirements such as Specification D4485 to ascertain acceptance.
 5.3.3  The design of the test engine used in this test method is representative of many, but not all, diesel engines. This factor, along with the unique operating conditions, needs to be considered when comparing the test results against specification requirements.
 Scope
 1.1  This test method evaluates an engine oil's resistance to aeration in automotive diesel engine service. It is commonly referred to as the Caterpillar-C13 Engine-Oil Aeration Test (COAT). The test is conducted under high-engine-speed (1800 r/min), zero-load conditions using a specified Caterpillar 320 kW, direct-injection, turbocharged, after-cooled, six-cylinder diesel engine designed for heavy-duty, on-highway truck use. This test method was developed as a replacement for Test Method D6894 .
 Note 1:   Companion test methods used to evaluate engine oil performance for specification requirements are discussed in the latest revision of Specification D4485 .
 1.2  The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
 1.2.1   Exception— Where there is no direct SI equivalent, for example, screw threads, national pipe threads/diameters, and tubing size.
 1.3  This test method is arranged as follows:
 Section
 Scope
 1
 Referenced Documents
 2
 Terminology
 3
 Summary of Test Method
 4
 Significance and Use
 5
 Apparatus
 6
 Engine Liquids and Cleaning Solvent
 7
 Preparation of Apparatus
 8
 Engine Stand Calibration and Non-Reference Oil Tests
 9
 Procedure
 10
 Calculation, Test Validity and Test Results
 11
 Report
 12
 Precision and Bias
 13
 Keywords
 14
 ASTM Test Monitoring Center Organization
 Annex A1
 Safety Precautions
 Annex A2
 Engine and Engine Build Parts Kit
 Annex A3
 Oil Temperature Control System
 Annex A4
 Engine Modifications and Instrumentation
 Annex A5
 Flow Density Meter Calibration or Verification Procedure
 Annex A6
 Aeration Measurement System
 Annex A7
 Specified Units and Formats
 Annex A8
 ASTM TMC: Calibration Procedures
 Annex A9
 ASTM TMC: Maintenance Activities
 Annex A10
 ASTM TMC: Related Information
 Annex A11
 Engine Break-in and Silicon Passivation Procedure
 Annex A12
 Schedule for Taking Oil Samples and Carrying out Analyses
 Annex A13
 Determination of Operational Validity
 Annex A14
 Typical System Configuration
 Appendix X1
 1.4   This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. See Annex A2 for general safety precautions.
 1.5   This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ASTM D8047-23 PDF

ASTM D8047-23 PDF

$56.50 $113.00