ASTM E1295-22 PDF

ASTM E1295-22 PDF

Standard Guide for Conducting Three-Brood, Renewal Toxicity Tests with Ceriodaphnia dubia

$52.00 $104.00 -50%
Product Code: ASTM E1295
Stock In Stock
Published: 2022
Number of Pages: 21

Available Options

Product Description

Significance and Use
 5.1   Ceriodaphnia  was first used as a toxicity test organism by Mount and Norberg ( 2 ) . Introduced for use in effluent and ambient water evaluations, Ceriodaphnia have also been a valuable addition to single chemical test procedures.
 5.2  Protection of a population requires prevention of unacceptable effects on the number, weight, health, and uses of the individuals of that species, or species for which the test species serves as a surrogate. A three-brood toxicity test is conducted to help determine changes in survival and the number of neonates produced that result from exposure to the test material.
 5.3  Results of three-brood toxicity tests with C. dubia might be used to predict chronic or partial chronic effects on species in field situations as a result of exposure under comparable conditions.
 5.4  Results of three-brood toxicity tests with C. dubia might be compared with the chronic sensitivities of different species and the chronic toxicities of different materials, and to study the effects of various environmental factors on results of such tests.
 5.5  Results of three-brood toxicity tests with C. dubia might be useful for predicting the results of chronic tests on the same test material with the same species in another water or with another species in the same or a different water. Most such predictions are based on the results of acute toxicity tests, and so the usefulness of the results of a three-brood toxicity test with C. dubia might be greatly increased by also reporting the results of an acute toxicity test (see Guides E729 and E1192 ) conducted under the same conditions. In addition to conducting an acute test with unfed C. dubia , it might also be desirable to conduct an acute test in which the organisms are fed the same as in the three-brood test, to see if the presence of that concentration of that food affects the results of the acute test and the acute chronic ratio (see 10.4.1 ).
 5.5.1  A 48 or 96-h EC50 or LC50 can sometimes be obtained from a three-brood toxicity test with a known test material, but often all the concentrations in the test will be below the EC50 or LC50. In addition, it is usually desirable to know the EC50 or LC50 before beginning the three-brood test, as a means to determine the concentrations for use in the chronic test (see 10.4.1 ). It should be noted that results from an acute test may not necessarily correspond to those of a chronic test, due to the addition of food to the chronic test.
 5.6  Three-brood toxicity tests with C. dubia might be useful for studying biological availability of, and structure activity relationships between, test materials.
 5.7  Results of three-brood toxicity tests with C. dubia can vary with temperature, quality and quantity of food, dissolved ion concentrations, quality of the dilution water, condition of the test organisms, and other factors.
 5.8  Results of three-brood toxicity tests with C. dubia might be an important consideration when assessing the hazards of materials to aquatic organisms (see Guide E1023 ), or when deriving water quality criteria for aquatic organisms.
 Scope
 1.1  This guide describes procedures for obtaining data concerning the adverse effects of an effluent or a test material (added to dilution water, but not to food) on Ceriodaphnia dubia Richard 1894, during continuous exposure throughout a portion of the organism's life. These procedures should also be useful for conducting life cycle toxicity tests with other Cladocera (Guide E1193 ), although modifications will be necessary.
 1.2  These procedures are applicable to most chemicals, either individually or in formulations, commercial products, or known mixtures, that can be measured accurately at the necessary concentrations in water. With appropriate modifications these procedures can be used to conduct tests on temperature, dissolved oxygen, pH, dissolved ions, and on such materials as aqueous effluents (see also Guide E1192 ), leachates, oils, particulate matter, sediments (see also Guide E1706 ), and surface waters. Renewal tests might not be applicable to materials that have high oxygen demand, are highly volatile, are rapidly biologically or chemically transformed, or sorb to test chambers. If the concentration of dissolved oxygen falls below 4 mg/L or the concentration of test material decreases by more than 20 % in test solution(s) at any concentration between renewals, more frequent renewals might be necessary.
 1.3  Other modifications of these procedures might be justified by special needs or circumstances. Results of tests conducted using unusual procedures are not likely to be comparable to results of many other tests. Comparisons of results obtained using modified and unmodified versions of these procedures might provide useful information on new concepts and procedures for conducting three-brood toxicity tests with C. dubia.
 1.4  This guide is arranged as follows:
 Section
 Referenced Documents
 2
 Terminology
 3
 Summary of Guide
 4
 Significance and Use
 5
 Apparatus
 6
  Facilities
 6.1
  Construction Materials
 6.2
  Test Chambers
 6.3
  Cleaning
 6.4
 Reagents and Materials
 7
 Hazards
 8
 Dilution Water
 9
  Requirements
 9.1
  Source
 9.2
  Treatment
 9.3
  Characterization
 9.4
 Test Material
 10
  General
 10.1
  Stock Solution
 10.2
  Effluent
 10.3
  Test Concentration(s)
 10.4
  Collection
 10.5
  Sample Containers
 10.6
  Preservation
 10.7
  Treatment
 10.8
 Test Organisms
 11
  Species
 11.1
  Age
 11.2
  Source
 11.3
  Brood Stock
 11.4
  Food
 11.5
  Handling
 11.6
  Quality
 11.7
 Procedure
 12
  Demonstration of Feasibility
 12.1
  Experimental Design
 12.2
  Dissolved Oxygen
 12.3
  Temperature
 12.4
  Preparing Test Solutions
 12.5
  Conditioning Test Chambers
 12.6
  Beginning a Test
 12.7
  Renewing Test Solutions
 12.8
  Duration of Test
 12.9
  Biological Data
 12.10
  Other Measurements
 12.11
  Test Material
 12.12
 Analytical Methodology
 13
 Acceptability of Test
 14
 Calculation
 15
 Report
 16
 Appendixes
  Food
 Appendix X1
  Culture Techniques
 Appendix X2
  Test Chambers
 Appendix X3
  Statistical Guidance
 Appendix X4
 1.5   This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific hazard statements are given in Section 8 .
 1.6   This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ASTM E1295-22 PDF

ASTM E1295-22 PDF

$52.00 $104.00