ASTM E3422/E3422M-24 PDF

ASTM E3422/E3422M-24 PDF

Standard Specification for Protective Helmets Worn by Pedestrian Roadway Workers

$40.00 $80.00 -50%
Product Code: ASTM E3422/E3422M
Stock In Stock
Published: 2024
Number of Pages: 16

Available Options

Product Description

Significance and Use
 4.1  The purpose of this specification is to provide performance requirements and test methods for the evaluation of protective helmets worn by pedestrian roadway workers.
 4.2  This specification may be used by suppliers, certification or verification bodies, testing laboratories, research and development organizations, and others assessing the performance of protective helmets.
 4.3  This specification may be used by purchasers in their evaluation of products to meet their needs and requirements.
 4.4  It is important that organizations using helmets complying with this specification conduct a hazard and risk assessment to determine the suitability of this specification and helmets complying with this specification for the specific hazards that they face in their operations on roadways.
 Scope
 1.1  This standard specifies performance requirements and test methods for protective headgear worn by individuals who work on roadways, including personnel involved in:
 1.1.1  Public safety (that is, fire service, emergency medical services, law enforcement, fire police);
 1.1.2  Road and highway construction and maintenance;
 1.1.3  Towing and recovery;
 1.1.4  Departments of transportation; and
 1.1.5  Safety service patrol.
 1.2  This standard addresses performance in terms of impact protection, chin protection (if a chin bar is included), external projections, positional stability, retention system strength, horizontal field of view, and face/eye protection.
 1.2.1  The performance requirements are listed within each test procedure as acceptance criteria.
 1.2.2  To claim compliance with this specification, test items shall be tested as specified in Sections 9 – 16 and shall meet the acceptance criteria.
 1.2.3  Optional tests and performance requirements are included in Appendix X1 – Appendix X3 for end users who have additional hazards of concern.
 1.3  This standard specifies pre-conditioning procedures to address environmental conditions in which these helmets are worn.
 1.4  This specification may be used by suppliers, certification or verification bodies, testing laboratories, research and development organizations, and others assessing the performance of protective helmets for pedestrian roadway workers.
 1.5  This specification is divided into the following sections:
 Section
 Title
 1
 Scope
 2
 Referenced Documents
 3
 Terminology
 4
 Significance and Use
 5
 Design Requirements
 6
 Testing Requirements
 7
 Conditioning Requirements
 8
 Conditioning Procedures
 9
 Impact against Hard Surface: Requirements and Test Procedures
 10
 Flying Debris: Requirements and Test Procedures
 11
 Chin Bar Test Procedure and Acceptance Criteria
 12
 External Projections: Requirements and Test Procedures
 13
 Positional Stability: Requirements and Test Procedures
 14
 Retention System Strength: Requirements and Test Procedures
 15
 Horizontal Field of Vision: Requirements and Test Procedures
 16
 Face Shield or Eye Protection Impact: Requirements
 17
 Product Documentation Requirements
 18
 Product Label and Package Label Requirements
 19
 Test Report
 20
 Keywords
 Annex A1
 Summary of Test Item Requirements and Related Details for Initial Type Testing
 Annex A2
 Summary of Test Item Requirements and Related Details for Surveillance Testing
 Appendix X1
 Optional Heat Resistance Test Procedure and Acceptance Criteria
 Appendix X2
 Optional Electrical Hazard Resistance Test Procedure and Acceptance Criteria
 Appendix X3
 Optional Visibility Test Procedure and Acceptance Criteria
 1.6   Units— The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined.
 1.7   This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
 1.8   This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ASTM E3422/E3422M-24 PDF

ASTM E3422/E3422M-24 PDF

$40.00 $80.00