ASTM E353-25 PDF

ASTM E353-25 PDF

Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys

$56.50 $113.00 -50%
Product Code: ASTM E353
Stock In Stock
Published: 2025
Number of Pages: 46

Available Options

Product Description

Significance and Use
 4.1  These test methods for the chemical analysis of metals and alloys are primarily intended as referee methods to test such materials for compliance with compositional specifications, particularly those under the jurisdiction of ASTM Committee A01 on Steel, Stainless Steel, and Related Alloys. It is assumed that all who use these test methods will be trained analysts capable of performing common laboratory procedures skillfully and safely. It is expected that work will be performed in a properly equipped laboratory under appropriate quality control practices such as those described in Guide E882 .
 Scope
 1.1  These test methods cover the chemical analysis of stainless, heat-resisting, maraging, and other similar chromium-nickel-iron alloys having chemical compositions within the following limits:
  Element
 Composition Range, %
 Aluminum
 0.002
 to  5.50
 Boron
 0.001
 to  0.20
 Carbon
 0.01
 to  1.50
 Chromium
 0.01
 to 35.00
 Cobalt
 0.01
 to 15.00
 Niobium
 0.01
 to  4.00
 Copper
 0.01
 to  5.00
 Lead
 0.001
 to  0.50
 Manganese
 0.01
 to 20.00
 Molybdenum
 0.01
 to  7.00
 Nickel
 0.01
 to 48.00
 Nitrogen
 0.001
 to  0.50
 Phosphorus
 0.002
 to  0.35
 Selenium
 0.01
 to  0.50
 Silicon
 0.01
 to  4.00
 Sulfur
 0.002
 to  0.50
 Tantalum
 0.01
 to  0.80
 Tin
 0.001
 to  0.05
 Titanium
 0.01
 to  4.50
 Tungsten
 0.01
 to  4.50
 Vanadium
 0.005
 to  1.00
 Zirconium
 0.001
 to  0.20
 1.2  The test methods in this standard are contained in the sections indicated below:
 Sections
 Aluminum, Total, by the 8-Quinolinol Gravimetric Method (0.20 % to 7.00 %)
 119–126
 Aluminum, Total, by the 8-Quinolinol Spectrophotometric Method (0.003 % to 0.20 %)
 71–81
 Carbon, Total, by the Combustion–Thermal Conductivity Method– Discontinued 1986
 153–163
 Carbon, Total, by the Combustion Gravimetric Method (0.05 % to 1.50 %)– Discontinued 2013
 98–108
 Chromium by the Atomic Absorption Spectrometry Method (0.006 % to 1.00 %)
 202–211
 Chromium by the Peroxydisulfate Oxidation–Titration Method (0.10 % to 35.00 %)
 212–220
 Chromium by the Peroxydisulfate-Oxidation Titrimetric Method- Discontinued 1980
 145–152
 Cobalt by the Ion-Exchange–Potentiometric Titration Method (2 % to 15 %)
 53–60
 Cobalt by the Nitroso-R-Salt Spectrophotometric Method (0.01 % to 5.0 %)
 61–70
 Copper by the Neocuproine Spectrophotometric Method (0.01 % to 5.00) %)
 109–118
 Copper by the Sulfide Precipitation-Electrodeposition Gravimetric Method (0.01 % to 5.00 %)
 82–89
 Lead by the Ion-Exchange-Atomic Absorption Spectrometry Method (0.001 % to 0.50 %)
 127–136
 Manganese by the Periodate Spectrophotometric Method (0.01 % to 5.00 %)
 9–18
 Molybdenum by the Ion Exchange–8-Hydroxyquinoline Gravimetric Method
 242–249
 Molybdenum by the Thiocyanate Spectrophotometric Method (0.01 % to 1.50 %)
 190–201
 Nickel by the Dimethylglyoxime Gravimetric Method (0.1 % to 48.0 %)
 172–179
 Phosphorus by the Alkalimetric Method (0.02 % to 0.35 %)
 164–171
 Phosphorus by the Molybdenum Blue Spectrophotometric Method (0.002 % to 0.35 %)
 19–30
 Silicon by the Gravimetric Method (0.05 % to 4.00 %)
 46–52
 Sulfur by the Gravimetric Method- Discontinued 1988
 30–36
 Sulfur by the Combustion-Iodate Titration Method (0.005 % to 0.5 %)- Discontinued 2014
 37–45
 Sulfur by the Chromatographic Gravimetric Method- Discontinued 1980
 137–144
 Tin by the Solvent Extraction–Atomic Absorption Spectrometry Method (0.002 % to 0.10 %)
 180–189
 Tin by the Sulfide Precipitation-Iodometric Titration Method (0.01 % to 0.05 %)
 90–97
 Titanium by the Diantipyrylmethane Spectrophotometric Method (0.01 % to 0.35 %)
 231–241
 Vanadium by the Atomic Absorption Spectrometry Method (0.006 % to 0.15 %)
 221–230
 1.3  Test methods for the determination of carbon and sulfur not included in this standard can be found in Test Methods E1019 .
 1.4  Some of the composition ranges given in 1.1 are too broad to be covered by a single test method and therefore this standard contains multiple test methods for some elements. The user must select the proper test method by matching the information given in the Scope and Interference sections of each method with the composition of the alloy to be analyzed.
 1.5  The values stated in SI units are to be regarded as standard.
 1.6   This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific hazards statements are given in Section 6 and in special “Warning” paragraphs throughout these test methods.
 1.7   This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ASTM E353-25 PDF

ASTM E353-25 PDF

$56.50 $113.00